1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Shift Linkage

Discussion in 'HYBRID -> EG-EK / DC' started by importstylez, Mar 23, 2003.

  1. importstylez

    importstylez Junior Member

    Messages:
    9
    Likes Received:
    0
    Joined:
    Mar 21, 2003
    Hello, Last Question, I have the motor ready its a b16 1st gen, in a CRX, do i need after market Shift Linkage? or will my stock CRX Si work?

    Thank you
     
  2. xj0hnx

    xj0hnx I wanna be sedated VIP

    Messages:
    14,172
    Likes Received:
    48
    Joined:
    Nov 10, 2002
    Location:
    C.C.TX.
    Like I said in your other thread where you ask this,depends on how much the mounts you used moved the motor,but I doubt the stock linkage (B16) would fit and if it does I doubt it would work or feel right.
     
  3. chet

    chet Senior Member

    Messages:
    888
    Likes Received:
    0
    Joined:
    Sep 30, 2002
    Location:
    st petersburg, florida
    you need Hasport adjustable linkage or a way to fabricate your own.

    this requires changing the mounting hardware on the d-series shift linkage to b-series. even then i wouldn't recommend it.
     
  4. importstylez

    importstylez Junior Member

    Messages:
    9
    Likes Received:
    0
    Joined:
    Mar 21, 2003
    okie sounds Great Thanks for all the Info. I think I have spent My last bit of Coin, Im all dun spening Money i hope after this last Upgrade.

    So Hasport it is.

    Again thanks every 1.

    Oh PS i also have the Mugen Computer, Any 1 know any thing about it?
     
  5. geoff19crx

    geoff19crx Junior Member

    Messages:
    19
    Likes Received:
    0
    Joined:
    Nov 16, 2002
    the stock linkage won't work. you'll need to get a shift linkage from hasport, place racing, etc. or get 90 - 93 integra linkage and have shortened.
     
Verification:
Draft saved Draft deleted

Share This Page