1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Side Moldings

Discussion in 'General Tech and Maintenance' started by newb_civic, May 20, 2003.

  1. newb_civic

    newb_civic Junior Member

    Messages:
    7
    Likes Received:
    0
    Joined:
    Dec 5, 2002
    I have a 93 Civic EX and I'm removing the side moldings. Should I just leave it to have the lip effect or cover it up? If I was to cover it up, what would be the best way to do it?
     
  2. BodyDroppedNikes

    BodyDroppedNikes ...PENDEJO.... VIP

    Messages:
    10,593
    Likes Received:
    103
    Joined:
    Sep 28, 2002
    Location:
    caught in a mosh...
    if you want the indention part there:
    remove the molding and weld holes shut. sand smooth and then primer and paint it.

    if you want it to be completely smooth down the door:
    remove the molding and then cut some metal strips wide enough and long enough to cover the indention and then weld them on. grind down smooth. bondo any areas that need to be touched up and then sand smooth. primer then paint.

    **moving to General Tech**
     
  3. liquid00meth

    liquid00meth Senior Member

    Messages:
    3,201
    Likes Received:
    0
    Joined:
    Nov 26, 2002
    Location:
    Laconia, NH
    werd to that.


    Don't let anyone convince you to use bondo.
     
Verification:
Draft saved Draft deleted

Share This Page