1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

single cam vtec in 88 crx

Discussion in 'ECU's, Electronics, and Tuning' started by theB16tegguy, Nov 14, 2003.

  1. theB16tegguy

    theB16tegguy Senior Member

    Likes Received:
    Sep 18, 2003
    charlotte, NC
    i have a 1988 crx block that im putting a vtec head on and i was trying to figure out how to wire vtec like what ecu can i use because im obdo and the only obdo vtec ecu was the one for the jdm b16 and i don't know if that will work also i was wondering if i could just put in a si ecu and get a vtec controller to run vtec. i just don't know what ecu to use for my application and i don't want to convert to obd1 or obd2 so if anyone can help it i will be much appreciative!!!!! :D
  2. radnulb

    radnulb Senior Member

    Likes Received:
    Sep 23, 2003
    Sinsinnaty, Ohio
    many options:
    1. Si or 88-89 PG7 ECU w/ VAFC
    2. Si/88-89 PG7 converted to 1wire vtec (still minorly developmental, but I have 3 cars runnin round on it) (see www.pgmfi.org or email me)
    3. 90-91 Si ECU w/ chip + VAFC
    4. OBD1

    interestingly, those are in INCREASING order of how well they will work. :)
Draft saved Draft deleted

Share This Page