Some pics of my hatch

We may earn a small commission from affiliate links and paid advertisements. Terms

92civicb18b1

The Trisexual
Well, I took some pictures. What do you think? Remember this car cost me $800.
Also how am I supposed to get that big ass dent out?
gallery_28741_116_1095173730.jpg

gallery_28741_116_1095173771.jpg

gallery_28741_116_1095173823.jpg

gallery_28741_116_1095173807.jpg

gallery_28741_116_1095173788.jpg

gallery_28741_116_1095173695.jpg
 
These are pics after I fixed the minor rust. No the bonda job isn't shitty, the paint I put over it makes it look shitty.

It is going to be painted Mettalic Steel Gray.
 
you can prob pop that dent by removing the interior plastics and sticking a 2x4 in there and prying

or beating the end of the 2x4

may sound odd, but it will prob work for most of it except maybe the very bottom...
hopefully the whole dent will just pop out though...
 
I wasn't sure about this, but I was thinking of drilling a hole putting one of those sheetrock screw things that have the wings open at the end when you turn it and try to pull it out like that.

I'm good with filler and pretty damn good with fiberglass too so as long as most of the dent it gone I can finish it off.

I'm going to try popping it out through the interior first though. Maybe I'll have good luck and it will come out nicely. I'm not worried about the molding part because before it gets painted I'm shaving them.
 
no the inside will not work that well due to the positon of the dent go by a dent puller and pull the dent properly
 
Back
Top