starting problem

We may earn a small commission from affiliate links and paid advertisements. Terms

BIGMAN

Senior Member
i had to swap back my engines having sum work done on the ITR motor so put the D15 motor back in. but now when i go to wind the motor over it makes a nasty screeching sound like theres no oil and the start motor sounds like its struggling to turn the motor over. theres oil in it, it ran fine before i swapped it out and has only been sitting in a dry barn for two months kinda odd. anyone any ideas
 
possibly just normal corrosion inside the combustion chamber...
get it running and let it idle and it should be fine...

the noise sounds like the starter might have some problems?
 
problem solved it was the alternator, seized up the noise was the belt slipping on the pulley wheel just had to free it up by hand
 
Back
Top