We may earn a small commission from affiliate links and paid advertisements. Terms
Originally posted by ChrisSiR@Jun 18 2003, 05:06 PM
I was told that the car i baught had an LS tranny.... how might i go about making sure i really do have an LS trans..... also.... correct me if im wrong.... but when ordering a clutch... i order from a non vtec teggy right? (89-91?)
Chris
Originally posted by B16RacerN2NR+Jun 18 2003, 08:59 PM-->ChrisSiR@Jun 18 2003, 05:06 PM
I was told that the car i baught had an LS tranny.... how might i go about making sure i really do have an LS trans..... also.... correct me if im wrong.... but when ordering a clutch... i order from a non vtec teggy right? (89-91?)
Chris
go to the reference section...they have all the tranny codes...so just look at the sticker on your tranny (it will be next to the engine code where your tranny meets your block) also, i'm guessing you have a b18a motor so the 89 integra clutch will not work because the 89 is a d series...if in fact you do have an ls tranny...your looking to order a clutch for a 90-93 integra
Originally posted by 92b16vx@Jun 22 2003, 04:47 PM
The S1/J1 is the 89-91 JDM Integra Rsi/Xsi tranny or S1/YS1 the USDM Integra RS/LS/GS/SE tranny.
JDM S1/J1
3.230
2.105
1.458
1.107
0.848
4.400
USDM S1/YS1
3.230
1.900
1.269
0.966
0.742
4.266
Originally posted by ChrisSiR@Jun 23 2003, 12:35 AM
So, what would i order my clutch from/for?
Chris
Originally posted by 92b16vx+Jun 22 2003, 06:42 PM-->ChrisSiR@Jun 23 2003, 12:35 AM
So, what would i order my clutch from/for?
Chris
90-93 Integra.
Originally posted by B16RacerN2NR+Jun 23 2003, 01:09 AM-->Originally posted by 92b16vx@Jun 22 2003, 06:42 PM
ChrisSiR@Jun 23 2003, 12:35 AM
So, what would i order my clutch from/for?
Chris
90-93 Integra.
didn't i say that already :unsure:
Originally posted by lsvtec@Jun 23 2003, 01:43 AM
No, not the 90-93 Integra as the Clutch changed from the 91-92. If you have the YS1 GSR transmission then you need the 92+ clutch. If you have the YS1 LS transmission then it depends on what year the tranny came from.
Originally posted by lsvtec@Jun 23 2003, 03:45 PM
In 92 Honda went to a bigger input shaft (at least for the B18 powered Integras, I don't know about the JDM B16s from around that time) and a larger clutch disk. So if he has a tranny from a 90-91 LS he needs a clutch from a 90-91 LS. Otherwise he needs a 92+ clutch.
Originally posted by lsvtec@Jun 23 2003, 11:14 PM
Is it a GSR or an LS tranny? How fast are you going at 8000 RPM in first? If you shift and you are doing almost 40, it is an LS tranny. If you are doing closer to 33 it is the GSR tranny. If you have the GSR tranny you need the 92+ clutch. If it is an LS tranny you will have to count splines on the input shaft.
Originally posted by lsvtec@Jun 24 2003, 10:11 AM
Counting the splines is not bad, there are only about 20 of them. I am sure that someone here knows the exact number.