sevenhillsbilly
New Member
FS: 1989 honda crx project car
i have a 1989 honda crx hf project that i have been working on what seems like forever. i think its time to move on and get rid of it. the thing that is wrong if you havent seen my posts is its not getting fuel and im getting fed up if i cant get it running in the next cuple weeks it will be up for sale i was just testing waters and see what kind of offers i can get. heres what i have done so far...
done to the car:
-d16a6 bottom end
-bored out .030 over
-new pistons, rings
-new rod and crank bearings
-one new rod
-new crank
-new oil pump
-new thermostat
-newer alternator
-new rear seal
-d16z6 head
-110k on head
-new timing belt
-new oil pan
-fel-pro head gasket
-xtd stage 1 clutch
-accel coil pack
-new wires
-d16a6 intake manifold
-obd0-obd1 conversion harness with p28 ecu
-kyb adjustable suspension
-upper and lower rear strut bars
-front strut bar
-D.A.D. racing seats with 4pt harnesses.
will include the following extra parts i have laying around
-d16a6 head
-450cc dsm injectors with pig tails
-t25 turbo with minimal play
-ebc green stuff brake pads
-new wheel cylinders
-braided rear brake lines
-stock suspension
-extra head lights
now the bad parts of the car
-no hood
-small dents on roof from when hood poped up on the free way
-no interior just door panels and the dash and center console
I am just testing the waters but if the right offer comes up i may sell but i would like to finish this project before i sell so i am not giving someone else my problems... if you have any questions let me know ..i will have pictures up either this after noon or tmrow
i have a 1989 honda crx hf project that i have been working on what seems like forever. i think its time to move on and get rid of it. the thing that is wrong if you havent seen my posts is its not getting fuel and im getting fed up if i cant get it running in the next cuple weeks it will be up for sale i was just testing waters and see what kind of offers i can get. heres what i have done so far...
done to the car:
-d16a6 bottom end
-bored out .030 over
-new pistons, rings
-new rod and crank bearings
-one new rod
-new crank
-new oil pump
-new thermostat
-newer alternator
-new rear seal
-d16z6 head
-110k on head
-new timing belt
-new oil pan
-fel-pro head gasket
-xtd stage 1 clutch
-accel coil pack
-new wires
-d16a6 intake manifold
-obd0-obd1 conversion harness with p28 ecu
-kyb adjustable suspension
-upper and lower rear strut bars
-front strut bar
-D.A.D. racing seats with 4pt harnesses.
will include the following extra parts i have laying around
-d16a6 head
-450cc dsm injectors with pig tails
-t25 turbo with minimal play
-ebc green stuff brake pads
-new wheel cylinders
-braided rear brake lines
-stock suspension
-extra head lights
now the bad parts of the car
-no hood
-small dents on roof from when hood poped up on the free way
-no interior just door panels and the dash and center console
I am just testing the waters but if the right offer comes up i may sell but i would like to finish this project before i sell so i am not giving someone else my problems... if you have any questions let me know ..i will have pictures up either this after noon or tmrow
Last edited:
