1sikef New Member Feb 27, 2009 #1 i have a b16a2 and i want to put ITR cams in. do i have to adjust the valves, if so can someone tell me the specs
i have a b16a2 and i want to put ITR cams in. do i have to adjust the valves, if so can someone tell me the specs
C chris95GSR New Member Feb 28, 2009 #2 no, you dont have to but it wouldn't be a bad idea to do so while you're in there and the specs are: intake: .006-.007 exhaust: .007-.008
no, you dont have to but it wouldn't be a bad idea to do so while you're in there and the specs are: intake: .006-.007 exhaust: .007-.008
FLounder power hungry VIP Feb 28, 2009 #3 you also need to change the valve springs if you want to rev past the stock b16a redline
Briansol Admins Admin VIP Mar 2, 2009 #5 itr cams require itr (or better) valve springs and retainers to hold them. gain is relative to what else you have done. stock for stock in a b16, about 5whp.
itr cams require itr (or better) valve springs and retainers to hold them. gain is relative to what else you have done. stock for stock in a b16, about 5whp.