1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Vtec pressure valve help

Discussion in 'Prelude' started by MJT805, Jun 11, 2009.

  1. MJT805

    MJT805 New Member

    Messages:
    13
    Likes Received:
    0
    Joined:
    Jun 8, 2009
    My h22a is running now but is giving me 3 codes. MAP sensor and TPS sensor which i'll check later. But the vtec pressure valve (code 22) may be an issure for me. I have no experience workign with vtec stuff so any help on what I should do would be great.

    I've read I should check my oil level and i'll also check my wiring to the ecu. any other suggestions?:confused:
     
  2. asim666

    asim666 New Member

    Messages:
    39
    Likes Received:
    0
    Joined:
    Jul 18, 2009
    my h22a is also throwing one of those codes which is the TPS sensor. i looked close to the firewall on my throttle body and found out that the grip on the sensor broke and was hanging down there somewhere. Got a new one and no more TPS sensor code but i still have the vtec solenoid valve (code 21) code. does anyone have a DIY on how to change the vtec solenoid and pressure valve on the h22a??
     
Verification:
Draft saved Draft deleted

Share This Page