1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

What WHP do you think my ls/vtec will have?

Discussion in 'HYBRID -> EG-EK / DC' started by IKONZls/vtec3, Oct 2, 2006.

  1. IKONZls/vtec3

    IKONZls/vtec3 New Member

    Messages:
    129
    Likes Received:
    0
    Joined:
    Aug 22, 2006
    Hi, i currently just bought some new custom cams from a guy in florida they are custom XS power cams he claimed 24whp from them even sent me a copy of the dyno chart, i also have dual valve springs n retainers im putting in as well as some aem cam gears, AEBS typhoon intake manifold, aem fuel rail, arospeed fuel pressure regulator, accel 310cc injectors, getting it dyno tuned w/ Apexi-VFAC-2, walbro 255 lph fuel pump, new megan racing type r style header 4-1, custom cat eliminated 2.5" inch exhaust no cat or resonator with N1 style muffler, the engine setup is an b18a1 bottom end stock, with Golden Eagle Kit with dowel pins, Pr3 pistons oversized .20, CTR camshafts and valve springs and retainers, running a stock p73 ecu, gsr tranny, act clutch and flywheel, just curious what kind of numbers to the wheels i should expect from this setup, im looking to get to low 13's all motor with nothing to crazy, any help on where i might go from here that doesnt involving turbo, supercharger , or nitrous let me know thanks again guys Jeremy:D
     
  2. Turbo&Auto

    Turbo&Auto Nick Go FAST!!

    Messages:
    3,269
    Likes Received:
    29
    Joined:
    Jan 9, 2006
    Location:
    East Burg, PA!
    XS Power = DEATH!!! I would avoid them like the plaque!!!!
     
  3. IKONZls/vtec3

    IKONZls/vtec3 New Member

    Messages:
    129
    Likes Received:
    0
    Joined:
    Aug 22, 2006
  4. Turbo&Auto

    Turbo&Auto Nick Go FAST!!

    Messages:
    3,269
    Likes Received:
    29
    Joined:
    Jan 9, 2006
    Location:
    East Burg, PA!
    Do a search on XS Power or otherwise known as SS Autochrome. They're a total shit factory putting out Ebay Whored out shit parts!
     
  5. phunky.buddha

    phunky.buddha Admin with a big stick Admin VIP

    Messages:
    28,465
    Likes Received:
    228
    Joined:
    Sep 30, 2002
    Location:
    Dallas / Fort Worth, TX
    You'll have to go to the dentist more often.
     
  6. VTECin5th

    VTECin5th Administrator

    Messages:
    2,182
    Likes Received:
    4
    Joined:
    Apr 17, 2005
    Location:
    Phoenix Az
    :lolhammer: :lolhammer:
     
  7. Turbo&Auto

    Turbo&Auto Nick Go FAST!!

    Messages:
    3,269
    Likes Received:
    29
    Joined:
    Jan 9, 2006
    Location:
    East Burg, PA!
    Hondaswap.com, I would like to be warned that my spelling will be corrected at any point. geez :rolleyes:
     
  8. IKONZls/vtec3

    IKONZls/vtec3 New Member

    Messages:
    129
    Likes Received:
    0
    Joined:
    Aug 22, 2006
    thanks for almost answering the questions i had asked...simple question guys come on
     
  9. get_nick

    get_nick These snozzberries taste like snozzberries... VIP

    Messages:
    11,937
    Likes Received:
    1,056
    Joined:
    Apr 21, 2003
    Location:
    Washington State
    what dyno? they all read differently
     
  10. ef8

    ef8 Junior Member

    Messages:
    260
    Likes Received:
    1
    Joined:
    Jan 25, 2006
    You cant just list your mods and expect to get an accurate guess on your actual whp.ITS ALL IN THE TUNE!!.You could have someone who doesnt know very much about tuning and get 100whp but then again you might get someone who is a tuning god and make 500whp..(whp is exaggerated)..Its just not possible to get a straight forward answer on what your WHP will be.As for your cams,that was a terrible decision..
     
  11. 1badteg

    1badteg Junior Member

    Messages:
    22
    Likes Received:
    0
    Joined:
    Aug 4, 2006
    tuned right youre looking at 200-250. and yes you should be easily in the 13's. good luck
     
  12. IKONZls/vtec3

    IKONZls/vtec3 New Member

    Messages:
    129
    Likes Received:
    0
    Joined:
    Aug 22, 2006
    ok its a dynojet, and these guys are excellent at tuning i mean i dunno if there perfect but ive seen some of the stuff they did and its good, why does everyone keep telling me these cams are junk i bought , what are they gonna like bend a valve or crack on me or something i dont understand, instead of just saying there bad , back it up like why do you know someone who ran these ones or this company....??

    the place tuning it is Hybrid Dynamics in youngwood, PA there supposed to be the best around here for honda/acura
     
  13. ef8

    ef8 Junior Member

    Messages:
    260
    Likes Received:
    1
    Joined:
    Jan 25, 2006
    They are like the APC of cams.Not good quality
     
  14. get_nick

    get_nick These snozzberries taste like snozzberries... VIP

    Messages:
    11,937
    Likes Received:
    1,056
    Joined:
    Apr 21, 2003
    Location:
    Washington State
    on i dynojet, i would expect to see 160hp and maybe 115 lb of tq.
     
  15. ef8

    ef8 Junior Member

    Messages:
    260
    Likes Received:
    1
    Joined:
    Jan 25, 2006
  16. reikoshea

    reikoshea HS Troll...And Mod Moderator VIP

    Messages:
    12,633
    Likes Received:
    193
    Joined:
    Apr 27, 2005
    Location:
    San Antonio, TX
    just low quality junk man. everyone knows it. i dont know how much R&D has gone into them, and im almost sure the quality isnt anything near skunk2 or comp. if you really want cams to liven up your lsvtec, those are the companies id go with.
     
  17. delboost

    delboost New Member

    Messages:
    22
    Likes Received:
    0
    Joined:
    Sep 17, 2006
    Location:
    charlotte nc
    the man just asked how much ho he will get witht his...i dont think he gives a shyt about wut u guys think of his cams ...

    well anyway try looking mid 13s low on slicks ...
    maybe around about..200 whp
     
  18. get_nick

    get_nick These snozzberries taste like snozzberries... VIP

    Messages:
    11,937
    Likes Received:
    1,056
    Joined:
    Apr 21, 2003
    Location:
    Washington State
    that's the point though, he should give a shit. if you were about to install low quality parts, wouldn't you want someone to tell you? if you had an ugly girlfriend, wouldn't you want someone to tell you? people here are just trying to help.
     
  19. EG6Civic83

    EG6Civic83 New Member

    Messages:
    118
    Likes Received:
    0
    Joined:
    Aug 12, 2006
    HAHAHAHAHAHAHAHAHHAHAHAHAHAHAHAHAHAHAHAHA!!!!! AN UGLY GIRLFRIEND!!!!!

    :laugh: :lolhammer:
     
Verification:
Draft saved Draft deleted

Share This Page