will these axles work with my swap?

[88SuperSi]

hey guys im getting ready to drop my brothers b16a2 engine and trans in my 88 [COLOR=#0072bc! important][COLOR=#0072bc! important]crx[/COLOR][/COLOR] si, my question is i know the b16a2 crank angle sensor is located at the oil pump and not the dizzy, im doing a obd1 conversion with this swap, am i going to need an obd 1 dizzy to make it work correctly? thanks.

 

[88SuperSi]

Sorry some how i screwed up my post, this was the actual post i meant to put thanks.



hey guys im putting a b16a2 engine and transmission out of a 99-00 Si in my 88 crx Si, ive heard alot of mixed answers on this but i need a 100% straight up answer, i have a complete set of 92-95 b16 eg axles with the intermidiate shaft, will these work with my swap? thanks guys.

 

[88SuperSi]

im sure someone got to know this?

 

[civichatch1988]

if the axles are for the motor? the b16 axles then yes they will fit your EF as long as the car has 5 speed hubs and not 4 speed or HF hubs