1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

wireing b18c1

Discussion in 'HYBRID -> EG-EK / DC' started by highperboi, Sep 3, 2003.

  1. highperboi

    highperboi Senior Member

    Messages:
    971
    Likes Received:
    0
    Joined:
    Dec 2, 2002
    Location:
    Alameda, California
    i read that whole wireing b18c1 to a 5th gen but it didnt really help. i am still very confused on what i am supposed to do. i have a obd1 b18c1 and i have a 93 eg. I have both the civic and the gsr harness. if i use the gsr harness what am i supposed to do? i know im supposed to wire the vtec and knock sensor to the ecu but how do i do that? do i have to rip apart my gsr harness and instead of pluging the knock and vtec to the plugs on the car, i run the wires straight to the ecu? if somone would be so kindly to help me out id appretiate it very much.
     
  2. 97dc4

    97dc4 Junior Member

    Messages:
    25
    Likes Received:
    0
    Joined:
    Jun 3, 2003
    I wired mine to my jumper harness. This is not the best idea, especially because you don't need a jumper harness. You should get the pins for your ecu and wire it directly to your ecu.
     
Verification:
Draft saved Draft deleted

Share This Page