1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

z6 swap, NEED HELP PLZ!!!

Discussion in 'ECU's, Electronics, and Tuning' started by CRseX84, Jun 13, 2004.

  1. CRseX84

    CRseX84 Senior Member

    Messages:
    481
    Likes Received:
    0
    Joined:
    Sep 4, 2003
    Location:
    SUNY Canton College, NY.
    hey guys i just swaped a 95 z6 into my 91 crx. im using the p28, and the dizzy that was on the z6, and everthing is hooked up, but im throwin a code for no. 1 cyl. that sensor is in the dizzy. and i tested everything the way the owners maual tells me to. i checked resitance for the sensor, and checked to see if anything is grounded... i also checked to see if my wirring is right, by checkin for continuity from the clip at the dizzy, and the plug at the ecu, and they are all good. but wut the heck!?!? any one else have this prob? i can drive it, but it wont let me rev over 3250rpm... and i dont realy like drivin it cuz its throwin that code.. if any one knows wuts up PLZ HELP ME!!!!
    thanks
    Tyler
     
Verification:
Draft saved Draft deleted

Share This Page