Gnarphantom
New Member
Last night we swapped a Z6 into a 94 hatch, I got a Chipped P06 Ecu and it is throwing code 21. I have no spark, or fuel. All grounds are good, fuel pump turns on, but it just cranks over. Used an EX civic harness and everything is plugged in. Code 21 is V-TEC control solenoid. We tried plugging in the stock D15 Ecu and it does the same thing. Any ideas??
Car is now throwing code 8 too, TDC sensor
Car is now throwing code 8 too, TDC sensor
Last edited: