Recent content by 95silverprelude

I did the plugs when the problem first started occuring. I did put a larger exhaust on it, all the tubing is now 2.5 inch

Wasn't the EGR valve, cleaned and reinstalled it, and its still happening. No one has any ideas?

Ever since I did my exhaust, my car bogs. This only happens once every 2 startups or so and only happens for a few seconds then its fine for the whole rest of the time. (I.E. when it does occur, it will not reoccur unless the car is turned off) Another important fact is that it doesnt happen...

Ok finsished the exhaust last night started it up and the cel light is on, I know why. My ATTS light is on as well, I didnt know the ATTS had anything to do with the o2 sensor or vise versa. I ran into a snag with the placement of the first o2 sensor, (02 sensor bung in header was right behind...

thanks for the reply, thats what I suspected. The header does have an o2 sensor bung, might just have to lengthen the wires.

Hello everyone, I have kind of waited to last moment to check this but, I am doin a full exhaust on my 97 prelude sh, tri-y headers, full 2.5 inch tubing, 20 inch resonator, no cat, and magniflow muffler. I have heard rumors that running different headers messes with the first 02 sensor, is this...

yeah thats the first thing I ordered Tri-y will be here monday, the motor is going to be higher compression by shaving the head. I guess ill have to call the companies and get feedback or call my tuner.

I just purchased another prelude, a 1998 prelude sh, and im going to do an all motor build. The car is going to be daily driven so nothing too crazy aiming for 220-230 whp. Ive been looking into cams and dont know which route to take. I did some research and people say brian crower gains just...

Ok well every vtec car i have been in vtec hits harder then in my h22, even a b16. I have rode in a 5th gen prelude and vtec hits harder then in mine. I have an h22a and vtec hits a 6k which makes it a little smoother but it seems like it should be hitting harder. Like last night on the...

im doing the trans in my car again and im going to put a lighter flywheel in it just wondering if an 8lb is too light. My friend has one in his mazda and it seems like a bitch to drive. please give me some input

re ive found a quarter panel

re none of the junkyards around by me have them, thats kinda why im asking

I was wondering where i can get a used 92-96 honda prelude passenger quarter panel. Thanks

does any one know any tricks to pulling the quater window and the rear glass in a 95 honda prelude? I tried with my parts car and the window shattered. Is there a trick or do you just have to cut the silicon with a razor blade?

jdm trans is the trans in good working order, does it shift smooth, good syncros.