Recent content by crxlsvtec1221

ok i found out the codes for the 0bd 1 ecu its on the D connector and its pin D4 it gave me a code of 4 crankshaft position sensor (CKP) and 22 variable valve timing and control pressure switch

sup guys i've been doin this swap for a customer and the problem is i cant read the code that the p13 ecu is putting out due to me using a jumper harness and when i use a stock ecu it doenst put out a cel so im thinking it may be the jumper harness im using or a sensor that is not being...

MPFI SWAP 1. FIND WIRE COLOR 2. FIND PIN LOCATION 3. 3 COLOR 3' WIRE 4. SOLDER AND SOLDER IRON 5. OBD0 ECU (P30) 6.INJECTOR RESISITOR BOX OBD O ( SI OR HF) *SINCE IM USING A SI HARNESS DO NEED TO RELOCATE THE INJECTOR WIRES ON THE FEMALE CONNECTOR WIRING UP CRANK POSITION SENSOR IS...

i had the same problem in my 95 civic hatchback cuz it was made in canada and was driven in canada basically the canadian cars dont have that electronic load detector in their vehicles the device is located in the fuse box under the hood and has two wires that lead to the ecu the in which...

sup everyone i always wanted to know if this ecu was able to be chipped i had one layin around and i wanted to know if there was hope for this ecu i've heard yes and no's but no true explaination why someone inform please

my blocks and heads deck was recently shaved yet i dont know how true this is i was told this from the person i purchased the motor from im guessin this could some how effect wut pistons i get if any

sup people i just interested in a couple of suggestions bout how i should build this b16 head nothing too agressive just a bit mild so far i have stage 2 crower cams and cam gears . help me out wit some ideas lookin for a n/a setup

YEA I GOT ALL THE STUFF FOR POWER STEERING AND THE LINES FOR THE A/C I AM WILLING TO TRADE FOR A STOCK 96-00 CIVIC HATCH OR 4DOOR

THANXS

1995 del sol Si with the single cam vtec

sup im selling my 1995 honda civic si hatchback it currently has a usdm B18c1 im selling the whole car with motor for 3500 or if you want i can sell you the si shell with full interior and body parts for 1500 and if anyone is interested i'll sell the motor or 2000 and yes it is very...

sup I just need to know how the procedure goes with me wiring up the reverse light switch and the safety neuatral switch also I heard that theres also a switch that locks the key in the ignition I dont the exact name of it but if anyone knows anything bout the electrical portion of this swap I...

Im planin to go all motor and I would like to make it a daily driver, I dont mind sacrifing gas milage

so should I do it or get another set of pistons, and If i do go with the ctr's what other procedures do I go thru, as in parts or block modification

thats the golden eagle head gasket or the oem head gasket