Recent content by luporum

Hi, i'm surfing in the net and i found some information. I found Helms manual, there is something about european civic MA,MB, but not for the ecu's wiring... I have a Haynes manual, but there is all of wiring diagram... But not Ecu's diagram... I hope to find something about it, if some...

Thanks for your help. I could be more snippy & peppy, but it is very difficult. The last chance is follow wire by wire. I need only the pinouts, i wouldn't damage anything. If you could help me i will be happy, if you coldn't, don't worry... Bye

Yes, i have a D series (D16B2 sohc non vtec) and i'll do a mini-me, with a D16Y2 head. But i have an automatic transmission, so i bought (from USA) a P28-A52. With this ecu i will use the vtec and automatic transmission. I could be the one and only automatic-vtec in Italy... In usa you make...

Yes, i know... But my problem is my actually harness/pinouts of my ecu... So i need a pinout of the P1k or P1h. If i know all the addres of my wires i have no problem... Thanks.

Oh yes... I wrote cut & joint, but i could move pin by pin... But the Ecu are different. P1k & P28 have the same connectors A,B,D, but different pinouts. For example, P28 ecu has A1,A2,A3 and A5 for the injectors, my harnes has A1,A2,A3,A4... (A4 is the vtec, but i will have vtec after...

Hi, Thanks for your answer. I have a OBDI with A,B,D connectors, like the first photo. I found the list of the pins on the net, for P28 it is ok, but for the harnes of my car it is not ok... For example, P28 ecu has A1,A2,A3 and A5 for the injectors, my harnes has A1,A2,A3,A4... So i need...

Hi, i'm writing from Italy, i'm searching some information to do my swap. I saw a lot of interesting thread, but probably european civic has little difference. I have a 5 doors Civic made in England '98 MB4 (the floor and body suspension are the same of EG) with a D16B2 engine (non Vtec)and S1LA...