Recent content by luVTEC

Thanks for the info ok so the plugs will be different, but you're saying that the number/function of the wires should be the same? BTW are there any other wiring issues I should be aware of?

Does the distributor wiring on a b20z (2001 CRV) plug into the stock eg civic harness even though they are different ODB's? Or would a b20b be better?

If I'm going to swap a JDM engine, do I need to get the JDM ECU reprogrammed? or can I use a USDM ECU with a JDM engine, would it even work? On a side note, what kind of brake upgrade should I get with only a b18b swap? brembo blanks & Hawk pads?

Thanks for the replies... DSM injectors will fit on a honda fuel rail? what is a t3/4 or t3 turbo off of?DSM?

Hey there, I'm considering turbo charging a stock b18b motor, nothing to crazy, i'm looking in the range of a 40% increase in power so maybe 6-8 psi. I dont want to spend $1000's on a brand new kit when I've heard its possible to turbo my motor by using a turbo from a DSM or something...do...

Of course not, Sorry, forgot to mention I was looking for a rotor that would work with those accord calipers

Is it true that these larger calipers bolt up to the 5G civic steering knuckle? :huh: Anyone here tried this or running this setup now? what type of master cylinder upgrade would you use with larger calipers? do accord or integra MC's bolt up? My current rotors are warped so I'm looking for a...

I use Tokico HP's and Eibach springs...I'm very happy with it. :D Cost about $500. Progress spring would be nice to try to.

I dont quite know what the exchange rate is like, but it was about $500 or so I think. For the swap it took about 4hrs in my driveway to do all 4 (first time doing this kinda work), its not hard at all but on one of the old rear shocks it was a little rusted so I had to use a grinder to...

Just finished installing my new suspension on my CRX, Tokico HP's and Eibach prokit. Dam this car handles nice and the ride isnt too stiff either. The only thing thats complaining are the tires :P . I know its not the best setup out there by far, but it was money well spent...didnt cost too...

thanks :thumbsup:

Is the LS engine that much heavier than the D15B to make a difference in terms of handling?

I'm swaping an LS engine into my 88 CRX and i had originally ordered progress B-series swap springs and Tokico HP's. My problem is I'm having a very hard time getting these progress springs (waiting 2.5 months now prepaid), so I'm going to cancel my order and get a different make of spring. My...

Thanks for the info Is it reliable to buy shocks/springs from ebay? I've been burned on ebay before.

Is any drop on stock shocks acceptable? or would i be better off to get a rear sway bar instead for now and save for spring/shock combo later?