Recent content by phoenix19l

DJ, Which side is you transmission on? drivers or passenger? I will do some more research into this for you and see what else I can come up with. Are you set on getting a honda motor?

I agree with OBX being crap. Even though it is American made, this company is still selling cheap products. I would also agree to save your money for your boosted setup. But if you really feel the urge to spend money now, then go get your intake mani from skunk 2. You cant go wrong.

all this for under $2000 stock

The HP/TQ for the SR20DET is 205/203 respectively.

DJ, I am more of a nissan guru than anything else. If you pull the dimensions on the b18 engines and pull a measurement on the sr20det FWD from a bluebird U2 (which is also has AWD optional), you will notice that they are within a few thousand of each other. Also, the sr20det is more turbo...

I currently have a 94 eg hatch with a 96 b18b1 in it. It is OBD2. I also have a problem...its fucked. I acquired a b18b1 from 1994 for free. If I swap it out for the 94 what will i have to change, seeing as how it already has a 96 b18b1. What will have to be converted over from OBD2 to OBD1...

I would check to see if you have a severed positive wire. It may not be cut all the way through and one or more strands may still be left on there. I would start at your injectors and work back towards the resistor box. also check to see if your positive wires are grounding out.

will do MADracer. I also plan on stroking it to a 2.1 and upgrading the head to titanium and upgrading all fuel flow. Hopefully I can run 9 or so pounds

I already have the only bid on it... 10 hours to go

ebay...sold out craiglist...sold out google...could not find any related sales that were not GSR or type R

Im looking for a JRSC for my 94 B18B in my 94 EG. Any help would be great.

I've had many base pioneer headunits along the years, and have not been impressed to much by them. The pioneer Premier head units are the best that I have come along in a while though.

wow. Im surrounded by stupid. Someone needs to lock this thread and burn it to the ground and start over.

If your amp uses 50a fuses, then put a 55a or 60a inline fuse as close to the battery as possible. I would just use the same size fuse or just slightly bigger.

Does anyone want to stay on topic here??? Anyone else have any idea why he is melting fuses? Has he got it fixed yet?