Recent content by roadracer321

I dont have a Valve Timing Oil Pressure Switch... Is this normal? I also looked on my harness for the B18C, and I didnt see one on there either. I called Hasport, and they said I have to put one in because the OBD2 engines didnt have one. Is there a way around this? The OBD1 P72 ECU requires...

Awesome!! Thanks a lot for the help! I can finally get this done, cause I was lost on these parts. You got all this from ProStreet? I didnt even know about that site.

Well, I have done A LOT of research on this for months and months, but I cannot figure this out now. I have saved a bunch of articles on here, including a really good by 92B16VX "How To Wire VTEC" , but it doesnt apply to me because of different color wires. So here is what I have going on. As...

Not most likely, he definitely does! The way you can tell the difference between a Type-R B18C and a SiR-G is the SiR-G has a P72 on the head. Also, the 96+ are OBD2a and 99+ are OBD2b. All the ECU plugs are different as well as the ECU. Your best bet is to run the OBD1 ECU, because if you want...

Dont use the JDM harness! Use your stock harness and swap out the plugs you need. The wiring would be a mess and even if you shortened and lengthened the wires to reach every area, it would still look like shit! I am doing the same swap right now as we speak. A B18C into a 92 hatch DX. I am...

This thread is old, but I figured I would throw my 2 cents in for the future viewers looking for a suspention setup. Although this is related to a 90 civic, I used Skunk2 springs with Koni Yellow's on my 90 Teg and the ride was awesome! I also had the Suspention Tech sways, but I am one who...

I found the pinout diagram ( http://www.turbod16.com/viewtopic.php?t=3572 )for this, but I am confused about something here. Do I do the red pinouts as well in addition to the yellow ones, or do I just do the yellow ones?

Thanks! That was helpful! I just posted a thread before on either this site or on another, and they said to convert my dizzy and injectors to OBD1 along with the ECU. I am going to look for that other thread now.

My question here is, I have a 99 Civic Si wiring harness (which is OBD2B), an OBD2a B18C, and a OBDI car. My goal is to use this harness and connect to an OBD1 ECU (P72). I heard rumor that I need to change the dizzy and injectors. True? Or could this just be wired up and used with the ECU? I...

Its the rely for the ignition I would assume. The guy says it runs really good, that just needs to be replaced. As far as buying the car running, why does that matter? Anyone buying this car is likely to drop a new motor in anyways right? I would think so anyways. Anyways, here are some pics.

Just bought a 5 speed Civic HB and it has 274,000 miles on it. Just wondering what people would buy this for. I kinda want to get a 92-95 hatch instead. The car has a crack in the dash, some rust on the wheel wells and bottom of the door passenger side. Doesnt run because of a relay switch...

I want your trunk...where you located?

Ok, I am actually getting the lien release to this thing now. So, if anyone is interested in this, let me know! I did end up selling a few things to this though, which were: trunk tail lights, mirrors, headlights, engine harness, center console. Eveything else is still there. I will transfer the...

I paid $3699 from HMotors. Make me an offer. If you say $1,500, I'm gonna laugh at you!