Recent content by ssgdgun

Thanks Sol. sorry didn't mean to be disrespectfull Pissed. just don't like getting attacked when I actually took about 3 minutes thinking about what forum to post in. and your right I should have took my time, just saw a motor on ebay and made what i thought was a low bid and poof I won it. and...

how bout you look up Pissed. If you look up I was asking about swapping heads or engines but i was staying in the D series motors.

gahhh! now someone tells me

yeah I didn't get alot of info so i just bought one. most places were asking atleast $400 for a warranty used motor. as is were obviously cheaper.

ok well i bought a "good running" complete 90 civic lx 5 speed engine (D15B2) for $102.50 plus $200 for shipping so guess problem solved. and it was the cheapest sure thing I found. without knowing whether my existing bottom end is ok.

ok well i bought a "good running" complete 90 civic lx 5 speed engine (D15B2) for $102.50 plus $200 for shipping so guess problem solved. and it was the cheapest sure thing I found. without knowing whether my existing bottom end is ok.

which motor? 88-91 D15B2 or 92+ D15B7? are they interchangeble without aftermarket mounts?

:unsure: so will a D15B7 swap for a D15B2 with same mounts etc?

:unsure: how about a D15B7 head from a 94 civic LX?

ok so thats a D15b7 right? what would i need to install it?

yeah but used head on ebay 50-100 head gasket less than 50, timing belt less than 50. ok so assuming my bottom end is good 200 bucks tops for a head swap. if my bottom end is screwed 300-500 for a decent used D15. a ZC is going to be what 400-600 plus 200-300 for mounts. ok so if i could do it...

ok I bought a 91 civic lx sdn for 80 bucks with a thrown timing belt. so here are my assumtions Please correct me if I'm wrong! that the valves are mush? that it would be cheaper to get a used head than replace valves? OK so which heads can I use with no modifications using the stock dual point...

ok I bought a 91 civic lx sdn for 80 bucks with a thrown timing belt. so here are my assumtions Please correct me if I'm wrong! that the valves are mush? that it would be cheaper to get a used head than replace valves? OK so which heads can I use with no modifications using the stock dual...