hey guys, I just picked up a 1987 civic Si for 600$. Car runs good, High mileage 230k, clutch is a little loose. But the Body is real clean. Couple little dents here and there but its never seen a winter. Its a 12valve of course but its PGM-FI. I had no idea the 87 si was Fuel Injected.
I don't...
anyone have any experience with these guys. I know they have been around awhile and I was recommended to them, for there low end making cams.
Top speed isn't my concern so I'm looking for a low end cam to get some better torq.
Either staying with a a6 head or doing a mini-me with a z6
Cars parted out and junked, motor is still good. Its a Sohc Zc non-vtec.
I'm wondering if I should look for a civic/crx shell and drop the motor in.
Looking for some off hand experience if this motor has some potential with some building. and if it does turbo or n/a
I want another honda/acura I...
Car was wrecked, and then parted out.
Let me know what you need, if its not listed.
Car was black
-Hatch. with tinted window.
-Drivers door with panel.
-Interior seats, back and front. Drivers side has normal wear. Small Hole.
-Cluster and its cover
-black time clock.
-cd/radio dash...
I can't really find much on this swap.
This would be bolting up to a 92-95 ex/si tranny.
I'm asking what will I have to do to make this swap work.
thx.
also when your looking at the gearing specs for a tranny, higher the number shorter the gear right?
So I'm searching around the internet here on ideas for my 94 civic coupe d15b7 bandit that I might be picking up.
I'm thinking on having the engine bored .020 before next season and running p29's on my stock rods.
Running a d16a6 cam or zc if i can get my hands on one.
z6 Intake manifold...
So I'm doing a mpfi swap on a 91 std hatch.
Ive modified that dx harness, (tps sensor and eacv plug)
I ran c1 and c2 into b10 and b12
Ran c1 and c2 up to blue/yellow blue/green for the distributor.
I ran all my injectors seperate.
I tested all these wires from the ecu to the connection with a...
So I'm doing a mpfi swap on a 91 std hatch.
Ive modified that dx harness, (tps sensor and eacv plug)
I ran c1 and c2 into b10 and b12
Ran c1 and c2 up to blue/yellow blue/green for the distributor.
I ran all my injectors seperate.
I tested all these wires from the ecu to the connection with a...
So my problem here is my car will crank but wont fire.
My distributor has power but I'm getting no spark. I ran wires to the two blue distributor wires from c1 and c2. I extended my tps and everything seems to be hooked up.
since you have to cut the fuel rail wires near the distributor end. You...
ok, so a buddy of mine is looking to pick up a 1994 dx coupe for a bandit. Car is race ready stripped with roll cage and everything.We're looking to get the most power for the cheapest buck, with no after market parts. No VTEC and I'm looking for an si tranny
The bore is the same as a d16a6...
ok, so a buddy of mine is looking to pick up a 1994 dx coupe for a bandit. Car is race ready stripped with roll cage and everything.We're looking to get the most power for the cheapest buck, with no after market parts. No VTEC and I'm looking for an si tranny
The bore is the same as a d16a6...
So I've swapped the head over and intake.
I ran wires from the injectors to the ecu to set up for mpfi
I ran c1 and c2 to b10 and b12
I ran c1 and c2 into the bay and hooked them up to the correct wires for the distributor
I'm getting codes 15 and 20. One is coolant temp cause its not hooked...
I am putting a d16a6 head on a d15b2 block.
I ordered the head gasket set and what not,
and i was told today, that when u put a new headgasket and everything on you want to buy new bolts. because where they torque em too stretches them out so there no good after you bust em off.
is this true...
yep thats what i be looking for.
I don't know if theres a difference between the ef si and dx air intake.
if there is let me know
if there isn't let me know
ASAP PLZ
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.