Whatsup hondaswap !
I haven't been on here in a good minute !
Well I'm here posting my b16a swap for sale ,me and my buddy just rebuilt this this a few hundred miles ago and it runs like a champ ! Vtec pops really loud no hesitation .
Has brand new oem Honda green bearings,rod,main and...
first off is it an si?
if not then check your ecu wires make sure none are pulled,chances are if the rex is a dx he did the mpfi wiring and a wire must have slipped out
or u got the wrong starter if it dont turn over
im wondering if a p2p y8 rod will work perfect for my sohc zc for piston #1
I am going to re use all 3 of my other rods but i dont know if i can just throw them on or go take my crank and rods for balancing.
please get back to me
hey whats up HS i got an integra ls and i recently just got my hands on a gsr longblock so i was thinking of dropping in thr gsr with the ls tranny.
now my question is
I have a 2000 integra which is obd2b and the gsr longblock is OBd1 and i was wondering if i can use a jumper harness using...
hey i got this turbo just recently and i dont know what kind it is since it has no plate or stamp on it and its only oil cooled but that turbine looks fu***ng Huge.
do you guys know what kind of turbo fitting i will need for this like what turbo headers and downpipe?
thanks guys
yeah it is oil/water cooled turbo with inner wastegate,turbo isnt fully installed still need to put the vacuum lines and piping,and i had the car running before but it was non vtec not its vtec
you will need the mpfi conversion done first before u can even do ANYTHING with your car,then if u want vtec connected the right way u need a obd0 to obd1 jumper harness and a obd1 distributor.
Cut the plugs from an 88-91 si dizzy and the harness and put those plugs on the obd1 dizzy
use p28...
hey whatsup fellas ive been working on my project car for 3 months ,its a 89 civic sohc vtec turbo and i just got finished up some wiring problems now i changed the head with a vtec p08-1 and put on a z6 head gasket on the d15b shortblock.
Everything was running cool only minimal smoke from...
yes the trany will fit prefect without any custom work,but you might need a new clutch kit as the spline count on the tranny might be diferent.
you can use your same ecu since its non vtec and you will need your obd1 distributor and alternator
think thats about it.
yeha i took my engine harness out and redid everything,i ran the 2 extra wires from the mpsi dizzy straight to the ecu and rechecked everything that was conected to the ecu,As for the vtec im going to wire up my vafc2 controller for vtec and turbo,the car worked fine before but now its acting...
ITS obd0 pm6 ecu and obd0 si distributor
the longblock was d15b non vtec but put a p08-1 vtec head on so now sohc vtec with obd0 dizzy which doesnt line up corectly
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.