Ok, I posted awhile back trying to solve a surging idle problem on a JDM B16A SiR2 in an EG. Well I'm still trying to solve the problem :dry: .
It only occurs when the car is fully warmed up.
I have the skunk2 throttle body that does not have a FITV so I have the coolant lines that would...
If anyone has the pipe with the resonator for an Apexi N1 that's what i need, but I need my car so if anyone has a cat-back exhaust that will fit a 92-95 civic coupe I'm interested.
Also if anyone has a stock catalytic conveter from this car I would like to rid of the test pipe that came on...
95 B16A SirII, I changed my spark plugs today and on cylinders 2 and 3 (the middle ones) there was oil covering the spark plug threads. The plugs from 1 and 4 had no oil on them. All the spark plug tips had similar appearance and wear. What would cause this? A warped head? broken head gasket?
I searched and couldn't find anything so if anyone knows what motor this intake is from that would be great.
On the back left (facing front) there is "P30" with "HF2" below it.
The reason I ask is because I'm trying to get a hold of a IACV and I need to know what one to get. Someone sold me...
My hot idle has been eff'ed up since I did my swap (92-95 b16a sirII) and i've tried everything minus replacing the IACV, today I was fooling around with stuff and I found that if i unplugged the IACV wire that the idle was fine...
first off is running the engine with the IACV unplugged going...
The hose coming off of the small nipple at the very top of the throttle body (92-95 b16a) going to the PCV is loose and practically falling off. What function does this line serve? and until I can get to the store and get another hose...
I have a jdm b16a sir2 with i/h/e (currently no cat) and on the highway I get around 35-37 mpg but around town I get 15-17 mpg...is the lack of a cat causing shit gas mileage or is it something else? Thanks
Will integra, RSX or EP civic seats fit into an EG civic with only little modification? By little modification I mean at most rewelding/modifying seat rails?
I drove through a huge puddle (unintentionally) i don't have a CAI just a short ram otherwise I would have hydrolocked...
But, I think some water must have gotten in. The engine seemed like it was running on 2 or 3 cylinders when any kind of load was put on the engine. BUT it idled fine and...
95 Civic with a jdm b16a sir2, i just received a fluidyne radiator and went to put it in and the inlet/outlet on the old radiator (the hoses too) are smaller. What hoses do I need to get to put this thing in? Thx
Would letting the engine run and bubble out the top of the radiator be sufficient or do I have to use the bleed screw. For the bleed screw, what is the correct procedure for bleeding it (engine running or off, pump hoses?, etc?) Thanks.
I need an intake...looking to spend under $200, what would be the best in your guys opinions? I was looking at the passwordjdm power chamber intake..http://www.passwordjdm.com/product.asp?numRecordPosition=1&P_ID=866
Is a 70mm TB too big for a b16a?
around 3k-3.5k I can hear a ticking coming from the engine (valves)...is this bad? I should note that the noise in not loud but definitly audible without the radio on and at speeds below 45 mph...
I have a throttle body (similar to the skunk2 or billet big bore) that does not have an outlet for the IACV valve is there a way to run lines so that it idles normal when warmed up...or do i have to replace the throttle body if i want a normal idle...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.