so the cel doesnt apply to me? cause I got the b20 out of a crv. How do I get rid of it though?Also I checked the clutch fluid and its good. Also its DOT 3 or DOT 4 just to clear it up for you.
Ok my CEL is flashing a 9 which is
9*- Accord Civic CRV CRX Del Sol Odyssey Prelude
85-98** 86-98 97-98 85-91 93-97 95-98 85-98
CYP Sensor (Cylinder)
defective circuit or unplugged / defective sensor
* not a valid code for any throttle body injection Hondas
** not a valid code for V-6 engines...
I dont have a clue why the dipstick is like that. Maybe a b20 one will work. There has to be a shorter version. OH and Brian thnx for the help bud. :worthy:
Maybe these pics will help
http://memimage.cardomain.net/member_image...317_50_full.jpg
http://memimage.cardomain.net/member_image...317_51_full.jpg
And here are the 2 dipstick tubes. The b16 one is on the left. Notice that it doesnt have a lip like the b20 tube...
Ok my b20 came with a long dipstick tube ( probably stock). The dipstick that I got with it was not long enough (proabably a different one not meant for the tube). The mechanic that installed the motor had to bend the tube so it could fit underneath the hood along with bending the dipstick. I...
Ok I just swapped a b20 into my eg coupe. I need to know which dipstick tube I can use? Can I just use the b20 one but it needs to be bent to fit under the hood. I tried one from a b16 but it doesnt want to stay in place. It comes out when I take out the dipstick. I really need to know guys. Thnx.
Ok Im new to this whole engine building scene. I want to know if ctr pistons would be good in my b20b. What would I need to do to get these to fit or whatever. The more info I get the better. Thnx in advance guys. Oh and the pistons currently dont come with rings.
My buddy put his on my motor and it fit fine. Then we tried mine but it didnt fit at all. Only 1 of the 3 bolts lined up and the others werent even touching the motor. I went back to the junkyard and the guy tried it on a b18b motor and it fit fine. So I dont know what the deal is. Im so...
Ok I got a half shaft from a local junkyard which came from a 94+ Integra(manual transmission). I tried to fit it on the b20 block but it just doesnt want to fit up. Im not to sure if my b20 is auto or manual. Should it matter if it is or not? I need to know why it doesnt fit. Do I need a half...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.