Search results for query: *

  1. m90polk

    civic clutch problems

    Did you check the flywheel for runout basically to make sure its not warped, or make sure you didnt contaminate it when changing the clutch. Also any high pedal releasing on a new clutch points more or less to the clutch master cylinder or clutch slave cylinder. I would start with diagnosing the...
  2. m90polk

    Running rich, FML

    Not to bring this back from the dead a month later but just windering if the op solved the problem??
  3. m90polk

    p1456 evap code need some advice

    I have a 2000 civic ex and I have a p1456 evap dtc .....leak detected I'm fuel tank area ....I've already replaced the fuel cap, so that's out of the picture. Here's my dilemma is there any way to pinpoint whether there is a leak in the fuel tank itself or if its the two way vent valve is...
  4. m90polk

    little insight please

    Yeah I have no idea I'm gonna try an mess with it in the spring..ill take the added height for the winter :)....but if anything just throw some coilovers in front next year
  5. m90polk

    Loose suspension and steering feel??

    Have you looked into getting the H bar for the underside of the car ...it really tightens up the front an relatively cheap
  6. m90polk

    little insight please

    I have a '00 civic and I installed tokico suspension on it (blue struts an red springs). Its been about 3 months since I installed it and the front never settled in, basically it's at stock height. I was wondering what would cause this to happen? I had the same type of tokicos on my '90 hatch an...
  7. m90polk

    6k rpm startup

    throttle cable is fine.
  8. m90polk

    6k rpm startup

    Have a 95 civic ex with d16z6, the problem is when I turn the car on it automatically revs up to 6,000 rpm. There previously was a piece of rubber that had been stuck in the intake manifold. It was pulled out an when it was pulled the throttle plate was bent in the process. So I fixed the...
  9. m90polk

    need some input

    The reading when it is closed is at. .49v....but the temp of the engine is what th3 fitv goes by right,because the car warmed all the way up but still had the ridiculous surge
  10. m90polk

    need some input

    Have a 95 civic ex with d16z6 one day driving an I was getting on it....next thing I know the engine just goes to redline anytime u even touch the gas, but at idle it will surge from 1k to 3500. And again any tap of the gas an it goes to redline. I tried getting cel but it just stays solid light...
  11. m90polk

    Overheat???

    Found out the problem was the temp sensor as soon as I replaced it fan finally turned on an no problems since
  12. m90polk

    Overheat???

    It has enough coolant an thermostat is good ....I was also thinking maybe the radiator cap may be bad
  13. m90polk

    Overheat???

    Well I think there is coolant in the system because the other day I was stuck in stop an go traffic for three hours in Boston an had no problem. Not to mention if there was very little coolant the engine would be very quick to overheat which it hasn't as far as I've noticed. But I will...
  14. m90polk

    Overheat???

    no they aren't hard or old and they aren't clogged that's one of the first things I checked for.....I'm gonna check the fan tomorrow and it's circuit... I also read elsewhere that bubbles in the coolant means the head gasket could be cracked but I don't think it's that or else it would do it all...
  15. m90polk

    b18a1 topps out at 4000 rpm... ect

    I had the same problem before turned out my TPS (throttle position sensor) was out of adjustment and it made the computer think it was at 2ooo rpm but it should have been at idle, I also had completely closed the idle screw thinking it would go down but it did nothing... So I would check that an...
  16. m90polk

    Overheat???

    I recently bought a '00 civic coupe, and just today while sitting in traffic for around 30 minutes the antifreeze started to boil in the reservoir (only about 60 outside). So I pulled over turned the car off an noticed that it boiled for about 5 more minutes until it stopped. I thought maybe the...
  17. m90polk

    Oil Squirting everywhere need help lol

    lol yeah I know if you look these engines up online everyone has horrible things to say about them. And I'm with everyone else they suck big time, I can't believe a manufacturer would produce these and actually market it under their name, I would be so embarrassed. :smh:
  18. m90polk

    Oil Squirting everywhere need help lol

    pcv was the problem old one was shot, I believe it was the original because the car only has 60k on it an it looked like shyt.
  19. m90polk

    Oil Squirting everywhere need help lol

    lol i know i had to do something to try an grab people's attention :D
  20. m90polk

    Oil Squirting everywhere need help lol

    Ok so I have a problem I have a 2001 Chrysler Sebring with a 2.7 v-6. So today it was very cold out about 20 degrees and I started my car up drove about 7 minutes or so to college about half way there I noticed there seemed to be a little smoke coming from under the hood, I checked the dash no...
  21. Try your Search on Google

Back
Top