Search results for query: *

didnt' really damage anything. The shock shaft didn't have any scaring on it, Bump stop was alittle streched out but nothing major. Everything else looks cool.

ok well, I went home and grabed some shit. The only thing i forgot was the allen wrench for the stock shocks and a 14mm socket ( i was going to rip the stock unit apart and use the washers and what not from the stock unit) so i wasn't able to get them apart because i forgot the allen wrench...

You know what. I think your right. I remeber looking at the GR-2 shocks thinking that the bump stop and bump stop mount looked different then the front ones. The shaft is set up different. And I don't think i put the washer in. Well i'm going to baroow someones car at lunch and go home to pick...

Well i installed some GR-2's and eibach sportsline springs. verythign was fine until i got half way to work them i hear bang bang bang. I pulled over and popped the trunk and the shaft from the shock shot thought the top hat. Anyone know why this would happen? I've never had anything like this...

Tech page here

basiclly just the piping.

^^

1 Zex purge kit and presure gauge. Both are brand new never used still in packaging. $110 Contact info: you can Email me at SmoothImports@optonline.net or PM me here. Paypal is the only form of payment i'll take. Or if your local you cna pick up. I'm in centeral jersey 07712

you can use the same bushing if there in good shape. Just make sure that when you put the new shock shaft into the mount and you are tighting it you don't compress the bushing to a diameter biger the the bushing socket.

FYI the ITR 99 ECU is OBD2B not OBD2a. I know someone with a 99ITR in his 99 EX and just used a 00 SI harness and verything worked fine.

Because the LX and DX have the cat right on the exhust manifold and not under the car after the axle seats. If you have an EX it will line up and your won't have to do anything. Trust me i have a 96 LX and put a full 00 EX exhust from header back and everything was cool

There should be a black stamp on the housing and it sould say V4D The type R says J4D and the LS i'm not sure. Let me check

urethane no question asked. Personally i had a full buddy club kit on my car. It was fiberglass and i was driving down the turnpike on my way to work. An 18 wheeler blow a tire and it slammed into my front bumper and just riped it apart. I mean it was all over the turnpike. After that i got a...

is the trowout bearing part of this?

So i picked up my GSR tranny last night and everything looks cool, The onlything it's missing is the release fork/boot and bearing. Now i'm not really that informed on the inner workings of the clutch/tranny. So someone point me in the direction as to were i can order the parts needed. Also is...

no thats not a good ideal. Because to get everything from Canada to the US will end up costing more Trust me, I just got 28 containers in on monday and it's isn't cheaper to bring them in from Canada.

you can use XE or FX. Personaly i find that FX is more accurate the XE. Currently XE is off the rate by $.07 And this addeds up when you are talking about hunders of thousdays of dollars. So use this one Currency Exchange It's FX Converter 164. And it's a very good site they keep update every...

I work for a high end gourmet food and housewares store. I work in the corperate office in jersey and import alot of ceramic plates and candles and other shit that we sell. And FYI the converstion is not 1000 Yen to 1 dollar like ASMALLSOL stated about. Todays exchange rate is 106.790 Yen = 1 US...

ok, Let me just give you alittle info about this. I import contianers from tailand all the time for my job. With a 20 footer, you can fit a hell of alot more then 10 motors. what you need to do is get a Sub-divided container with was it have a huge shelf that goes right down the middle and makes...

Ok i need a 99-00 SI Rear tranny mount and driver side mount. Also need a 96-97 AC mount. Please hit me up if you have these.