Search results for query: *

boston rm9 rear and boston rm6 fronts is all you need.......excellent setup...

Hello i have a few questions about exhaust systems....my friend is selling his skunk2 exhaust system from his integra type R and i was wanting to buy it from him but i drive a 96 civic HB.....will his cat back system fit on my car??....i also have a GSR motor installed in my car.....if not is...

ok question about the skunk2 camshafts.....if i were to get the stage2 camshafts could i still retain the same idle or what???...thanks for the info guys you really help me out alot of what parts to go with.....peace...

is portflow quite expensive??.....is there a big difference in price between them or skunk2, crower???....thank you and have a nice day!!!

93 is no problem....so your saying im in the clear with running 85mm bore and around 12:1 compression??....thank you and have a nice day!!!

Hello guys im in the process of gettting my motor rebuilt and have a few questions...i have an 1.8 GSR block that will be going under surgery getting resleeved and the works.....so my question is will i be safe to run an 85mm bore??....also what at kind of compression can i be running with 91 or...

Hello guys i was wondering which one of these is the better of the two??....as for valve springs, reatainers, valves, camshafts go????......i am wanting to build up my head and im a difficult choice between these two companys....i hear nothing but good things about these guys so please tell...

ok what if i wanted to add a vtec head from a z6 motor???.....all i have to do is wire up the vtec and get something like an v-afc to activate the vtec correct???.....thanks for the help!!!

Hello i recently purchased a 1989 crx si and was wondering if my old d16y7 motor would work in it??....the motor in the crx still runs but it not trustworty enough for me.....i was thinking if i just used the head and block off the y7 then used tranny,mani,distrib,etc. off crx it could...

so lets say i broke all these sockets and when i go to trade them in do i have to get the same ones or can i get different sockets??....

is this true??....can you bring any craftsmans sockets and trade them for other sockets or tools???.....cause i have a alot of standards that i do not use and would like to exchange them for some other things......thank you and have a nice day!!!

i think on the 94-97 the headlights are more circular and the 98-up they curve a lil inward......

integra seats will fit but only 3 bolts will bolt up to the rails.....

lol.....i have the same header that i bought for my GSr and i made that thing fit.....you have to cut that bracket and just slowly screw it in crushing your oil pan.....i know i know its a bad idea but i have no choice until i get another header just thought i share this with you.....thank you...

alright thanks for the info guys......peace!!!

Hello i have a few questions.....i drive a 97 DX hatch with a 94 gsr motor in it.....both of my outer cv joint boots are busted on both sides....i already replaced one boot then like a couple months later it busted....so i just want to replace both axels shafts....so i went up to Napa and ask...

anyone??

Hello i was wondering if an aftermarket fuel rail and FPR for a b16 will fit a b18c???....thank you and have a nice day!!!

plug it up if it fits it OBD1 if not then its 2.....

100% sure the a/c bracket works becasue i have that on my swap now but not sure about p/s casue i don't have it....