Search results for query: *

good news! or maybe bad? so i was unpluggin my fuse like u said to see maybe if it did sumthin and as i was turning the key over a couple times to try the jumper i noticed my fuel pump wasnt turning on anymore and my relay was no longer activating. so i figure i cut a power wire from the feul...

ecu still for sale?

.....ill keep u posted = (

i thought so to...... = ( any ideas? ill try to pull the fuse and try again. how long will it take the comp to read fault codes considering it wont start? 2 3 tries turning it over? any help would help at this point

well i hooked up my fan, ect sensor, and ecu all together and i was all excited to see if i got ride of my ECT code so i go in jump the connector and find out the ECU wont throw me any codes except one solid light stayin on no matter what i do. any reason for this? didnt unplug ecu just wired...

sweet thanks alot Blanco really helped me out, even if its not the problem. u got some good info. ill keep u posted.

well i did all the wiring myself = S. i am getting fuel in the rail .my pump turns on, i got all 3 clicks from my relay, its a p28 mini me d15b2 block y8 head. only codes i have are v-tec pressure switch (i havent connected), ect for the rad fan (havent connected) and iat (bad sensor). no other...

thank you, clarified alot. so its not working because there's no signal, due to wire cut, bad connection, interferance etc correct?

alot of manufacturers assign the fuel supply management and ignition managment to the ecm which gets its informations from the sensors located inside the distributer providing the information to the computer to manage the fuel supply and ignition. bad sensors in the dizzy no fuel, or no signal...

nah there not clogged there not even dripping, none are firing. i think its my dizzy or maybe i just gotta re-wire it all and shield winding on all the dizzy wires everywhere.

ah i see, nvm its the inigtion from the actual key ignition thats what teh abreviation means......well im still stuck on my mini me with no spark and no fuel. the rail fills up and pressurizes but nuthin comin out. new dizzy all grounds all powers. need help

tells me the vss sensor has 3 wires one going to the ecu one coming from a junction spliced to the main relay and then going to the under dash fuse box,fuse 12, and one ground coming out of the sensor. i dont have the sensor plugged it or attached in anyway.

on my wiring diagram i have a pinout b10 yel/blu ecu for vss going to the vss sensor and another wire ign power going to it aswell adn the wss grounding. 3 wires. on another note do i need a siganl from the cluster to the ecu? if so what olour is the wire? obd1

this may be a stupid question but if i have a p28 ecu and i dont have my vehicle speed sensor installed will it not let me get any spark?

lol ill let ya no

im running the obd-1 p28 ecu. i have the 2000 dizzy, i converted the harness to fit the obd-1 plug.

triple checked it, checked it so much i did i 2 times, on 2 different dizzies. is there any wire that is sneaky or needs to be placed somewhere else. hey i was told the y8 has a crank angle sensor on the block but the dizzy is supposed to have one in it? so does that mean i have to use the a6...

I have a D15b2 block d16y8 head,intake, and exhaust. i am using a p28 computer and an obd2 dizzy, i converted the harness myself and matched all the wires to there respective places, and i am not gettin any spark. i changed my dizzy changed my relay. my computer works fine in another si. only...

I have a D15b2 block d16y8 head,intake, and exhaust. i am using a p28 computer and an obd2 dizzy, i converted the harness myself and matched all the wires to there respective places, and i am not gettin any spark. i changed my dizzy changed my relay. my computer works fine in another si. only...

I have a D15b2 block d16y8 head,intake, and exhaust. i am using a p28 computer and an obd2 dizzy, i converted the harness myself and matched all the wires to there respective places, and i am not gettin any spark. i changed my dizzy changed my relay. my computer works fine in another si. only...