Search results for query: *

I have a D15b2 block d16y8 head,intake, and exhaust. i am using a p28 computer and an obd2 dizzy, i converted the harness myself and matched all the wires to there respective places, and i am not gettin any spark. i changed my dizzy changed my relay. my computer works fine in another si. only...

did u install the thermostat backwards?

i dont thikn they are teh same teh solid black/yellow wire adn blue wire are combined with the other sensor wires on the plug for obd-2 as obd-1 has 2 seperate plugs. im pretty sure. im askin is this colour code u provided the right way to wire it?

thanks

sry to post this so late into everything but i have an obd1 harness and my dizzy is obd2 so if i were to connect the plug from the harness and match it to the plug on the dizzy according to this diagram it should work?

yea that true the FD is teh only diff. so ifu have a dx tranny not much work to make it si.

if ur gonna get a better intake bigger injectors and change ur cam. mine aswell get a turbo run it at low boost and ur good. 7-8 psi id say. prolly be hittin around 230-240 if ur lucky with all ur mods. a decent setup for roughly 4-800$

i am having alot of trouble tryin to get my mini me to start up. i have tripple checked my wiring from the distributer to the computer. i have a p28 computer with a 2000 si head and a 1990 dx auto block. i finally got the car to turn over(main relay problems) i have searched up and down. i was...

hey i have almost completed my mini me project. to get u up to speed i have a 2000 head a 91 block and 2000 intake and exhaust. now i finally did all the wiring got it all hooked up and installed in the car. it turns over but i get no spark. all the wires are plugged in where they are supposed...

try to check if ur o2 sensor is reading rich mixtures. rich is around 1-1.3 V. if ur map sensor was bad u'd have poor engine performance overall not just gas mileage. correct me if im wrong but open loop is when the engine is still not recieving all the signals from the sensors i.e. o2. but when...

try ur idle air control. ur throttle plate is closed when ur off the gas. ur idle air control is supposed to let air bypass and if its broken or stuck it wont let in enough air and ur car will sputter and die.

thats what i thought aswell. but he still insists i am wrong. thank you.

u have the whole head complete but without a manifold or intake to get it in and out faster it wont make a big difference. u need full flow throughout the entire engine. from ur intake cone to ur exhaust tip. im not to sure of ur whole setup but i didn't see anythin about the intake or exh. if u...

finishing my mini me just a few questions. #1 can i use an obd2 dizzy with the p28 ecu d15b2 block and y8 head? #2 can i use obd2 injectors and connectors directly hooked up to the p28 with no resistor box? #3 what degree do i have to set the dizzy at to get the timing right? if u guys can...

i have a mini me setup i am almost complete. just a few question. 1. can i use an obd2 dizzy with the d15b2 block and the y8 head? 2. can i use the obd2 injectors directly hooked up to the computer with no resistor box or anything? if u guys can help me it owuld be appreciated oh yea 3. what...

thanks agian guys

no but i wanna do everything myself.

bad toe causes a feathring effect on the tire. bad camber more accuratly negative camber causes inner tire wear.

thanks.

i have a mini me setup y8 head and d15b2 block i want to no if i can use the obd2 dizzy? i have converted the the plugs to fit it. will it work?