Search results for query: *

Where can I find good wiring directions to wire the vtec on a non-vtec civic. I have a p28 ecu, and a 97 civic(no vtec wires). Does anyone know of a site that can help?

HELP

ALSO, Im under the impresion that i can run the vtec wiring later, meaning the car should start without that.

97 civic LX w/(low budget) d16z6 obd2 to 1 conversion harness w/ modified connectors on original harness What distributor should I use? How do I go about matching up the wires if i have to use the si distributor(It has 2 connectors, not 1 and the wires don't seem to be the same colors)? My...

OK, I'm guessing the o2 sensor is the one on the header(single wire), what am I supposed to do with that? Would that be a reason for the car not to start, everything is hooked up, moified harness, conversion harness, p28 ecu. THe car does not start, There are 2 plugs that i couldn;'t find, one...

(your non-vtec engine) - (your non-vtec engine head) + (head from vtec engine) = MINI-ME Get a head(SOHC) from a d16z6 or d16y8 etc. Then get someone to wire your vtec or vtec controller. Should add about 15 to 25 ponies(if thats what you like to call them)....i think you can also find them...

OK, Im surfing ebay an run accross electric turbo. For those who aren't loade is it worth it? An if it isn't, (or is) what can one expect from an "electric turbo"?

I amn looking for a p28 and a 92-95 wiring harness from a vtec civic. If you live near the tri-state area I will pay topdollar and pick up as soon as possible.

OBd1 engine (d16z6) in a obd2 car(d16y7), I have splice&joined most connectors, including those to the fuel injectors. I am stuck at what to do with the distributor wiring, Should I cut the wires(I have no diagram, only common sence) or should Itake the distributor of the 97 open it up and put...

OK i took apart the distributor an checke the wiring, everything seems fine. A mechanic told me the engine wont start because of the crank sensor from the 97LX is located in a different position, he said the only option i have is to get the full wire harness from a 95 ex or si along with the...

Im sure of fuel spark and distributor, but what do you mean by throwing codes?

The engine cranks compresses but no start! I put a 95 ZC(equivalent to d16z6 i think) in my 97 civic lx, I modified the lx harness and zc distributor(with lx's together) and the engine will not start. I know the crank sensor on the lx was at a different position from the ZC but i was tol that...

I need a p28 ecu, and an OBD1 wire harness.

If I cannot use the ZC head then I may take you up on that. Someone help, can I use the ZC head on the d16y7?

Would I be better off doing a mini-me? D16y7 with d16y8 head?

I was thinking the same thing, but I checked online surfing endlessly and I find a few places that tell me there are others, Like: http://cnsmotors.com/honda.htm they say theres : 91-95 CIVIC 1600 SOHC (=D16Z6) VTEC N/S ZC VTEC 1.6 for $595...

I have a SOHC ZC motor(98), I have no idea how to get it in my 97 lx(d16y7), what will I need? Is it a direct bolt in? What about the Crankshaft sensor, Mounts, controllers etc. I have minimal knowledge but a basic mechanic giveing me a hand, just need a point in the right direction. Please...

I know this swap is supposed to be simple, but does anyone know of anything I may need? I have a 97 Civic LX D16y7 I want to drop in a ZC, how? Will the vtect work, or do i need a new ecu or controller? An I noticed a few wiring ifferences, will the engine work without a few connections like...