Search results for query: *

Hey just want to let everyone know that I got the OBD2a to OBD1 conversion harness and vtec subharness from rywire.com, above is the directions to make your own conversion harness I promise its all right. But the rywire harness was amazing, If I had more time on this I would have done everything...

Well if im not mistaken the K24 from a crv is like a dime a dozen. The K20 from the rsx is going to be about 6k. after you make the good motor you can also build another to resell. But the main reason for this is that it drops the compression so much. It puts you right in prime turbo range and...

Hey people im getting ready to build a motor for my car and I was thinking about doing a build that I read about a while back. In this build the block, crank, rods, pistons most of the bottom end come from a K24 from a crv. Then you take the heads, head gasket, timing belt, accesories and oil...

I'm pretty sure that is out of the developement stage. I was looking around for some harness stuff and im pretty sure I saw that mount kit. Check out hasport and skunk2.

you can do it without the conversion kit but you would still have to remove the ecu connector from the prelude harness and repin from the designated pins on the right to the pins on the left. its still much more work than the conversion harness but if your capable of doing it, why not save some...

Hey people I stayed up late last night and went over both wiring diagrams and came up with the conversion for the obd1 h22a into a obd2 accord lx manual. I used the list from above and added the required accord harness pin to the right of the p13 connector pins. I only did what i needed to make...

What ECU are you using? Have you had it running at all since swap or is this first time trying?

Hey does anyone have an ECU pinout diagram for the 96 accord LX. I found it for the H22A if anyone is interested I just need the corresponding information for the accord. All help is greatly appreciated. OBDI 93-95 H22a Layout A1->A25--B1->B15--Blank--D1->D21...

Hey people getting ready to start the swap. I have the ecu, harness everthing from the h22 and the old motor will be out of my accord tomorrow night. I am going to put my accord harness on the h22 hook up sensor and extend wires. I have to add the vtec part of the harness and knock sensors, then...

Thanks a bunch I think I am going to order the conversion harness form skunk2 but I need to figure out about the vtec part of the harness. I already kno the 4 connectors i have to lenthen and the 1 that i have to change the connector on completely Just a lot more reading ahead i hope to have...

hey just found out that the motor and stuff didnt come out of a 96 but 93 prelude. This is OBD1 and my car is OBD2 can I still do the swap?

Hmmm thats not what i wanted to hear. I am putting in an h22 it came with the motor and trans still together, the wiring harness, ecu, all sensors and lots of other stuff. What would I have to do to make this swap work? I am totally comfortable doing any wiring mods i might have to make as I am...

Hey im going to put this in my 96 honda accord with my swap. Mine is obd2 is this going to cause problems?

Hey just checking to see if anyone knows what this computer came out of. here is the code. "37820-p13-n01 552 j-mt" any help is greatly appreciated. Thanks

Yea I found that site this morning thanks though. It looks like the wiring is pretty easy I have rebuilt wrecked harnesses so this I can handle. We are going to start tackling this tomorrow night so I will post pics when we finish probably sat or sun since we both work full time. Thanks for the...

More questions after researching. It looks like im supposed to use the accord harness for the swap and have to switch some pins in the ecu connector, extend some sensor harnesses, run the vtec harness and modify the motor mounts. I feel comfortable doing all this, can I fabricate the vtec...

I should probably note that the whole swap setup is JDM dont know how much of a diff that makes. Thanks for the help

Codes wont tell you everything. Clean your IACV and connectors for the TPS and IACV. Are you comfortable doing electrical diagnosis, do you know how to use a dvom?

Hey people I am going to need all the help i can get. First off I am an experienced professional mechanic and I will be doing this swap with a very good friend who is also a master mechanic, but we dont work on honda's. My accord has transmission problems so I bought a complete H22 from a 96...