Search results for query: *

I'm looking for all the places I can get a distributor for my 90-91 ZC. I've seen lists only mentioning the 89 teg dist as a replacement. I have heard that an Si can be 'modified' but have not seen what needs to be changed on the Si distributor. Thanks in advance.

I just swapped out my 91 HF motor with a ZC and I have a Few things available. The HF motor has new (<10K) main and rod bearings, head gasket, water pump, cam seals,rings, front main seal, timing belt & oil pan seal. It does not have a distributor or alternator. The transmission is also...

I was just wondering if anyone could direct me in the right direction to get a slim fan for my AC fan and a 91 integra Tie rod end. Both of these Items were way overpriced from a local Autozone and I know they can be gotten cheaper without a loss of quality. I have found fans on Ebay, but I...

I went to get the 88 prelude Si belt for my zc today and there was a Fuel injected and a carbed version. Is there a difference here? (they were diff part numbers) I grabbed the FI belt, but I can always bring it back if Im supposed to have the carbed instead. Do I need a carbed belt or FI belt...

I ordered a ZC from hmotors and it is currently en route. I had a few questions I wanted to verify before it got here in case there are any last minute parts I may need to grab before installation because I will be using the ZC transmission as well. Im not sure if axles are coming with the...

Im looking at putting a ZC into my 91 HF. The transmission is on its last leg, and this seems to be the best option to get the car back on the road. 1. ive checked hmotors, total JDM and my local importer, are there any other real good sites to deal with? possibly ones that have the entire...

Short story: 2nd gear is popping out and fifth wont hold well (doesnt pop, just kinda slides out over time until its not moving the car anymore) Long story: I have had this awful gear noise coming from the tranny for the longest time whenever i let off the gas but stayed in gear. Then tonight...

I have my ideas already on what is going on, but I always prefer a second, unbiased opinion. The battery light on the dash indicates that the battery is at too low a level of voltage for the current situation, right? Mine came on a day ago and would blink out if i went into the higher RPMs...

I have a TPS and EACV that both need to be replaced on my 91 CRX HF. I was wanting to know what cars/motors i can pull these parts off of that will match my intake manifold. I know DX is out of the question, but i didnt know if a throttle body from a 1.6 or an integra would work (obviously...

91 CRX HF Heres the problem: Im getting misfires that tend to be from a stand still. Making the clutch feel like im dropping it when im not (motor cant keep up with the clutch like it used to) and sometimes the car will miss entirely for a few seconds, not changing acceleration regardless of...

hey guys, this question is for a friend of mine whose 87 CRX SI does not want to start on certain occasions. It seems to be heat related. The battery has been checked and load tested: passed. Fuel pump and filter both replaced spark plugs, distributor, ignition coil all recently (<5kmi)...

My seat is falling apart and extremely uncomfortable considering that I have to work in it all day. I was wondering if there were any seats from other hondas/acuras that bolt directly in and are much more comfortable (prelude/integra maybe?) and possibly dont have that annoying habit of wearing...

I have a 91 HF with the Sanden compressor and i want to know how to find out if its internally or externally equalized or if it would be the same part either way. Need to know for the AC expansion valve. thanks

My friend was told that an EW HF tranny and SI tranny were the same. I know the EF trannys have the same number, but are not the same in the slightest when it comes to gearing. Is it the same way with the EWs? I searched and checked the reference stuff, so i think i looked at all the...

Ive looked on the site and the only real info I can get on a swap into an EW is about the ZC swap. My friend is racking his brain because he cannot find a 1st gen ZC without extremely high mileage. He is trying to to get a higher quality/power combo with a higher gas mileage as well. He wants...

91 CRX HF. I just changed the brakes a few days ago, and im dead sure that i replaced everything just right. However, the pads were almost completely gone. After I replaced it with new pads and rotors, I drove it to work, on the way to work the right side started to shudder and felt like ABS was...

so heres the deal: I just got the AC fixed a few months back with the help of a professional mechanic, had to rewire to the fan because they were melted together and grounding out, once the problem was fixed, the AC ran perfect for about two months. Now the fan will not move. I have jumped the...

I was thinking about putting an HF 5th and final drive into a ZC tranny to give it some highway mileage, but I came acroos someone who said the integra LS final was even longer? I was just wondering if anyone knew which fifth and final would be best(longest) for an OBD0 ZC. THX

For some reason my roomie thinks that the HF tranny from a 91 runs lower than 2kRPM at 60 MPH. If someone knows for dead sure what the car runs at 2k Please let me know or how to figure out if there is a more specific ID than just L3 on the tranny. Just trying to figure out if my car has the...

I was just wondering if spray painting a body part would make a future "real" paint job look any worse? I have about three different colors on my rex and I dont want to officially paint it until I get all the dents and such out, but I would like to have it fewer than three colors. I figure I...