Search results for query: *

Remember the rear is a pan-hard setup, simply adding lower springs wont work. Because of the panhard bar when you lower the car the axle shifts to the drivers side, if you lower the rear at all you'll need an adjustable panhard bar, look around for them online. I've never done it because I...

B-series into an 84 is going to cost you in the 6-8grand range. If you want a cheap (relatively) engine swap look for 1G integras, the D16's to be exact. I dont really want to take the time to explain it furthur than that, do some research and come back.

Check your float level in the carb first off (small window on the drivers side of the carb). If that is within specs, should be centered in the window, then it could be any number of things. Try holding the engine running w/ the throttle (not high RPM's, 3 grand should do) for a little while...

that 93 is a fuel injected motor, unfortunatly for you your carbed right now. To put the 93 in you'll first have to switch over to fuel injection. This is going to require you scoring the entire fuel system (tank, pump, ALL of the lines, etc.) from a Si (fuel injected) civic of your vintage...

$100? I dono, make me an offer.

Rims are in very good shape, would take $150 shipped on a set that didn't have tires on them. They weigh 15 lbs a piece so shipping is not very cheap. Let me know.

Lots of goodies for you 1st Gen CRX guys. 2 full sets of the bullet hole rims (3 with good tires), seats, lots of underhood stuff, good tranny, brakes good, no interior, no front body panels. Picture below, ask and see if I have something, make an offer when you ask for it. Located in Cary...

When you do a refund they give back the fee too.

hmmm, I need ones that mount to the B-pillar, I guess just refund the paypal.

You've got cash ($25 to be exact). Please be sure to include the mounting hardware with that seatbelt, and ship as soon as you can, can't take anybody for a ride in my new car until it comes in :(

Picked up an 85 with rebuilt everything, but the body has seen better days (rust through on the floorboards, you can tell its been picked up with a forklift at some point). Would like a good clean shell to swap all the new stuff into, closer to Central NC the better, let me know if anybody has...

Passenger side seatbelt (both pieces) w/ bolts, shipped to 27513?

well, nevermind, lol. Thanks though!

Just got an 85 DX that's carbed. The motor (top and bottom) is fresh with only 5K, so I dont want to swap the head. What would I need to handle this. I am guessing ECU and intake mani off a fuel injected car, plus some wiring skills. Has anybody done this before that can give me the run down?

nobody wants it?

Got one for free... worth putting onto my 96 LS?

Buddy of mine has the Eibach sportline's on his 88 325, increased his cornering like theres no tomorrow, and barely stiffened the ride up at all. Eibach makes good stuff.

Same with the new Mazda RX-8, they under-rated the power to keep it under a certain number that keeps insurance companies smiling, or so explains every dealer I've been to

Bought this thing a while ago, didn't pay much, I'll take $10 shipped. Bought it for my 96, but I assume it will fit any 94-01 Integra. Still in the original packaging, PM me with any questions

Damn, I got an 89 Yota sporting Cragar drag rims... friend of mine had it before me, got T-boned by a '01 325... totalled the front end of the BMW and put a small nick in the rim, that was the only damage the pickup took... can't kill a Toyota, especially not with a BMW it seems