Search results for query: *

I have a 92 Civic CX Hatchback and i have a 94 JDM GSR motor in it, and it is FAST. I can't tell you a 1/4 mile time thought because i won't be going to the track for like another month. But 13's is VERY possible with a B18C/B18C1 in your hatch with a few mods!

I have a 94 JDM GSR with a Skunk2 Intake Manifold and a generic short ram air intake in my 92 Civic CX Hatchback. I have drove my car running straight header with NO exhaust and then i drive it now with my stock 1.5 or 1.75" exhaust and i feel a pretty big power loss, my question is how much hp...

I almost have my tach all ready to be re-installed after my new motor swap(B18C in my 92 Hatch). I had the wire off my tach that "reads" the "rpm signal" running to the blue wire off the distributor on my old motor, it worked but i think it was un-accurate. I heard you could run the tach wire...

How big of a shot of nitrous could a JDM B18C handle with all stock enternals with out it damaging my motor and making it really weaker? Also its a daily driver. Thanks!

What does a JDM B18C(GSR) redline at? And should i set my shift light for the motors rated redline or what? I just need to know the exact rpm to set my shift light at? Thanks!

Ok whats a brand that makes some good cams/cam gears? I think thats the route im going to go. P.S. Also what would you recomend for a light weight flywheel and a good clutch? THANKS A LOT!

I have a 94 JDM GSR and im going to put it into my civic cx hatch very soon, my question is, im not sure if i want to buy cams first or pullys first. I want pullys because i want to be able to rev quicker because B18 trannys are geared longer(correct me if im wrong). But i also want cams because...

Yes i got a tranny with my swap but it has a hole in the bellhousing and instead of fixing the hole i wanted to buy a complete new one!

Does anyone know a web site that sells B-Series Tranny's? P.S. I need it for my JDM GSR. THANKS!

Which wires(and how many) exactly do i have to run independtly from the motor to the GSR ECU? Also when you say run wires indepently do you mean...taking a 12v wire from whatever on the motor, running it into the fire wall, then cliping a ECU "pin" onto the wire and then pluging it into my GSR ECU?

Anyone know?

The darkish areas on the valve cover ARE grease marks...Its NOT the paint itself if thats what everyones thinking. In person you can even see finger prints in some spots, but i cleaned it since then. So quit making fun of my valve come, i mean how can ya bitch about a dirty valve cover on a JDM...

Also do you think the motor is OBD1 being the GSR ECU they gave me when i bought the complete swap was OBD1?

What are the secondaries? Arn't they some of the wires needed for Vtec? P.S. I have a 92 Civic so isn't my car pre-wired for Vtec? I read on the articles on this site that EVERY 92 Civic was pre wired for Vtec, So would i still need to do anything with the secondaries? Thanks!

I have a JDM B18C GSR that im putting in my 1992 Civic Cx Hatchback. The wiring harness clips on the B18C that come off the motor WILL clip into the clips on my CX harness that come from the firewall into the engine bay. But there are a few wires that run into the clips on the B18C, that don't...

How much could i get for this GSR Y80 tranny on ebay? Everything works fine except when the car got wrecked it broke a piece of the tranny off. P.S. Or is it possible to weld a plate over it and still use it being all the gearing and stuff inside it is fine...

Its going in my 92 Civic CX Hatchback (2094lbs :D )

Hey fag nuts...The valve cover was not painted with a damn paint brush, It just looks that way because the picture makes it look like that, Also yes there is a few chips in the FACTORY paint(or whatever its made out of) on the valve cover but almost all valve covers have chips in them. Don't...

The guy that i got the motor from has a few EXTREMELY NICE Integras and he has them because he has a lot of $$$$$$$$$. My motor was in one of his Integras he was just starting to build for a show car but then he wrecked it and got screwed on insurence so he just wanted to break even, so he sold...

Does anyone know where i can buy a new bellhousing for my JDM B18C? Also will any hydro b-series tranny bellhousing work with my B18C?