Search results for query: *

Like serrilion mentioned. It depends if you're running a obd1 ecu which for that case u would only need 1 02 sensor but if your running obd2 which the car should be since its an ek you would need both 02 sensors. If you don't see one Hooke up to the sensor bong by the cat then I suggest you head...

I guess thats one of my only choices for now.u wouldn't happen to have a spare b series tranny for sale would you?

I need a little bit more info specific towards the counter shaft opposed to the main shaft because I want to replace the 1-2 gear synchros and I have that thread saved on my phone just to be sure

Ok so I'm having problems with my b16 trans! Won't go into 1st-2nd but goes into third and up and reverse.!now I know that it's most likely the synchros!! But all I see are threads on how how to change 3-5 synchros and not 1-2! If anyone know what I can do or any links on a DIY I would greatly...

I would start by taking the sound system off and see if that's your problem.about the CEL I wound check what code it brings up then diagnose that problem

I would start off by buying camber kits for the from and getting alignment and balance to see if this fixes your problem

I believe that the chipped ecu should be plug and play so it should work right off the bat good luck tho

so here is my list of possible combo setup parts. eagle h beam rods sleeves( not sure which set yet) 9:1 low comp je pistons arp rod bolts hondata s300 p72 water pump walbro 255 lph fuel pump edelbrock proggressive nitrous kit dont know what bearings to use or what crank i do know i will be...

Reason for the nitrous is just a personal preference on the build.not alot of turbo nitrous builds in MD so I want to be one of the few.building the block and going all out isn't really the issue.i am going to put the motor together once its been at the machine shop but is it really necessary to...

What would be the best internals setup I was thinking eagle rodsje pistons 9:1 low compression but not sure on anything else that would safely handle all the power any help and advice would be greatly appreciated

:) good evening hondswap.... as u can see i am new to the site.im wondering if i can get anyones input on a build that i am planning to start soon.im not sure if it would be safe or recommendable but i plan to do a turbo and nitrous b series build! i am still doin research on the build but any...