Search results for query: *

should i get a 205/60-14 tires that weighs 19lbs a piece w/ a 6.7 inch tread width or get a 195/60-14 tire with 16lbs 6.1 inch tread .2 inches smaller diameter i will mostly be drag racing the question grip or less unsprung weight?

I know one of you guys have one i just hope you see my thread. Shipped to Selinsgrove, PA 17870 I don't mind picking it up if you're close enough something like this

so i finished working on my car and i cannot get it started. it seems as though there is no signal to the starter, i tried replacing it and it wasn't that. i did get the engine to turn over once today and once yesterday. yesterday right after taking it for a test run after push starting it. and...

so i bought one of those cheap ass wastegates from egay. there is no place to hook up vacume lines to it? is this safe? how does it control the boost pressure? can anyone with experience with these wastegates help

I need the water lines and fittings for a nissan t3 turbo off the 300zx TT, if anyone works at a junkyard and can aquire these parts for me i'd be very happy. I have been digging around for a while but can't find these. I don't need the whole thing just where the lines meet up with the turbo and...

I am missing water lines to my t3 turbo off a 198-something nissan 300zx it's the one with the .63a/r on the intake. i only have one bolt but am missing the other and both banjo fittings I looked around a little bit online for replacements and could only find banjo fittings for turbos on Rx-7s...

hey guys, so i actually turned 21. now when i am walking home drunk late at night i shouldn't feel guilty when i cop drives by, right?

so i have this huge airfilter and i was considering options to have it fit where it needs to. I know the best thing to do would be what promotes best flow. the options i arrived at are: since the inlet on my turbo is 2.25inches and the collar of the air filter is 3.5inches, i would buy a...

So there aren't anyposts in here for a while, but i think it would be cool to have a meet and get to know some of the guys that post here from the area. How about a meet sometime in may or june at the local dragstrip around here? Beaver Springs Dragway - IHRA Summit Drag Racing Friday, June...

I got an air filter and it is too large to fit on the application i need it for. I has an internal diameter of 3.5 inches, I am looking for a straight up trade for something with a 2.25 or 2.5 inch inner diameter of a similar style. It needs to be short since the area is tight. help a brotha'...

So my winter beater an automatic 1991 chevy cavalier staion wagon started acting up on my last roadtrip. It is slipping out of gear and slow to shift, i talked to my mom about it ( it was her car in the past) and she told me that the trans was rebuilt about 2 years ago so it should be in good...

So i am looking to get new tires, i am going cheap on these and found the HTR H4 which is Sumitomo's High Performance All-Season Radial has good reviews on tirerack and the price is less than $50 a tire not a bad deal. i am wondering about size. on the steelies i bought there are two different...

I am looking for oil inlet and drain flanges with fittings for a t3 turbo. i am also looking for water banjo fittings like these. but why spend $40? Banjo Kit and while i am making a WTB thread, i want to pick up a y21(b16) or s80(gsr) transmission with the hydro clutch but i can't afford it til...

Check out my downpipe, i guess this is called a whitey bend (from homemadeturbo) and the manifold all finished, i decided to route the wastegate back into the exhaust so it would pass inspection, thank god all we have around here is a visual imspection. I also made the that wacky 7 bolt flange...

One of the questions that seems to come up quite often on this site is about what is needed if you decide to piece together your own turbo kit. This is easy to do in your own garage if you have a means to cut pipie and a welder. If you have the technical know-how to put a flywheel into your...

so i was browsing eBay and as happens to the best of us, i found a wastegate that was only $36 dollars that ended in 30mins. I thought man that would be great to win. I won it. it happens to be tis wastegate XS-Power Ltd (01341) 241573 nice, now i know it's xs power, fortunately i thought...

eg parts cheap, 14b, b series 14b manifold i have some thing to get rid of springs, i am not sure of the brand $100obo, i can take them off to ship two driver side corner lights best offer tail lights best offer, i have all four the other two are in the tailgate best offer, prefer pick up...

so before he left to go back to school my friend bet me $40 if i could beat him in a 1/4 drag race (legally at a track) by the time he got back in the summer. he has a 2004 mach 1 mustang, his fastest time was 13.8. I know i am at least as good of a driver in the 1/4 as he is. I was able to pull...

So i have a Ls transmission the syncros are going bad it grinds when a push it's limits in second, third and forth. how much does it cost to put new sycros in or would it be more worth it for me too wait and buy a b16 transmission. or another option i was thinking of would be to replace the...

so i am looking to put a t3 in place of the 14b in my car in hopes of actually passing the 200whp mark on the dyno. here are pics of the manifold i made to pass this goal. I managed to buy an old manifold that my friend bought for his focus for the price of a full tank of gas then i cut it and...