haha my bad didnt even notice i put the h there but ya i would probly wire it up 2 like my head lights or something so how much could i get just the middle section for?
it has 240 thousand miles on the motor but the tranny is in good condition a new clutch was put in not 2 long ago but im more selling the motor with the tranny the motor runs and all just high mileage can rebuild it ezly and i will go lower in price if need be
i have here my D16a6 motor and 5 speed tranny out of my 89 crx si for sale for a low price of $300 obo if you have any questions or want to see pics just email me at mikester1222@hondaswap.net
thanx
ok i got on here once befor and found a wire diagram that shows where to put the wires into the ecu for a b16 or b18 swap but now i cant find it at all! can any one give me the link or show me how to get 2 it??
thanks
~MIKE~
i went to the honda dealer at our place and the only person that was there was a kid about 18 years old and he couldnt even figure out were the clutch and throttle cables were located on there computer!! now do i just get it off the 90-93 integra or is there a particular motor or will any...
I have looked for a clutch cable anc cant find one i have been askting to look on a 94 del sol or are those hydrolic clutch what car can i order them from that has one to work on the b16??:confused:
OK every one i got it i think the whole problem was the ecu was not bolted in i had it out doing th wireing but i bolted that in and started it with a lil starting flued and it fired and kept on running!!! thank you everyone for your help!!!! i will still be sitting there just looking at it if...
ok i havnt bout any new injectors yet but lets say i put them in and the same problem happens is it possible that my fuel presure regulator is bad and not putting enouph pressure for the injectors 2 work??
ok i tested the wireing with a light tester and the light came on so i took the fuel rail off and pulled the injectors off and looked at the tip of the injectors and they were dry but the fuel rail was full of gas so i am guessing that the injectors are bad but do tell me what are the odds of...
ok im going to check today but no i didnt touch the wireing to the injectors so they should be good i got my tester here and i will try her out!
~MIKE~
ok i am going to try these both tommara with my luck its probly both are messed up the wireing and the injectors so i will try it out and let ya know if it works
Thanks for the reaply
~MIKE~:D
ok i have the computer that came with the b16a engine and wired up the the 4 wires that needs wired up everything is working fine i have spark the motor is turning over fine the fuel pump is pumping gas but the injectors are not working i checked the injector resistor box by taking the one off...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.