You guys where right.. FP just fine. I called a few places to get it tuned and they want 450. Thats too much. What can i do? ARe there places a can send the P28 and have it re-chipped or can i just buy a stcok chip and run it for a while??? I dont need the car to put out every last HP it has. thanks
Im not tuning it with anything... Plan to adj the deg of timing this weekend and adj fuel pressure too. I have not had a chance to even look at the car this week. But i think when i first got it the FP gauge was on like 60psi..... But if that does not do it to take it to a tuner??? The one i...
My set up: 92 tegg
B18c1 bottom end
GSR crank and rods
CTR .25 over pistons (PCT)
ARP head studs
ITR water pump
B16A oil pump
NEW tensioner
DC sports 4-1 header
Head:
B16A head, ported and polished, 5 angle valve job
ITR cams
ITR valve springs and retainers
ITR injectors
B16 intake
What fuel...
Ok, what if when i line up the green arrow mark to the time cover pointer, the cam gears are off... The reason is my tensioner cam lose mabe jumped a few teeth of timing. Should i line up the cam gears and remove the timing belt then adj the crank with its marks?
The mark with the big green arrow????? rotate the CRANK 3-5 teeth and leave the cam gear pointers lined up with the head? TDC on the compression stroke?
"That's Fantastic!! I like those type EZ-outs, but for some reason only have the crappy helical ones."
Pick them up a NAPA, 4piece EZ-out set $20
"Ya know, Did it come apart like in the pic? (right under the 'hex') I'd write up a not so nice letter describing what you went through with...
Timing Help with pics
1. What piston should I put the motor on for TDC?
2. Do the cam gears look lined up right?
3. Why does the crank pulley marks not line up with the timing pointer on the timing cover? Also there are 3 marks on the crank pulley. What mark should line up with the timing...
FIXED IT!!!!!
1. Tools: 3/8 EZ-out, punch, Hammer, 3/8 drive long rachet, 8 in 3/8 drive extention, ½ socket, PB blaster, elec tape
2. No damage to the head or spark plug thread (in the head).
3. Questions? Post up!
There is the plan soak in pb blaster a couple days, then try and use an EZout... If that does not work, pull the head. These are pics of the problem and MAYBE fix. I cut an old plug to get an idea of what size EZout to use..
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.