I will also throw in a spare turbo(brand new)and another built b16 block. The block is sleeved and bored to 84mm. Needs to get machined again either cyl 1 or 4 has damage(valve broke at the stem) Has JG turbo rods
Hey guys im in a little bit of a bind and need to sell my hatch. Car has plenty of go fast goodies. The head is completely ported and polished, upgraded valvetrain(.5 oversized exhaust valve 1.0 oversized intake valve) JG turbo camshafts Custom JG intake manifold, 770cc RC injectors, Blox 80mm...
I know it might be a big pain in the ass but take and drain the pag oil from each component and put back in the same amount in the new piece. Also some compressors come with oil already installed
I am selling a real master power turbo from Brazil not the cheap ebay knock off. Turbo is rated at 550hp. Turbo is brand new and has never been installed. compressor a/r is .50 turbine a/r is .63. It is a t3 flange with a 2.5" 4 bolt discharge outlet flange. looking to get $400 shipped. Open to...
im running a stock crank and i am in the power goal that you are trying to hit. My block is at 9:5:1. Im boosting 18lbs. just some advice make sure you buy name brand parts otherwise your throwing money away. Make sure that you are going to be able to spend a good deal of money on this project...
Im selling a built b16 head. Head has a full race port and polish from JG Engine Dynamics, titanium retainers, upgraded springs from JG Engine Dynamics,and black nitrade oversize valves. Head was built for a turbo setup. Head will also come with a replica type r intake manifold. I also have...
swapped the obd2 dizzy to a obd1 dizzy eliminated the jumper harness for the dizzy and still does the same thing. From what my buddy told me is this engine was running before they did the swap. Timing is not off either. set it to tdc and checked all the alignment marks. Still hits rev limiter at...
My friend brought me a 95 hatch with a b16b swap. The issue he is having is with the jdm b16b computer it hits the rev limiter at 5500 rpms. He is using a a jumper harness for his dizzy and his computer (obd2 to obd1). There are no stored codes in the ecu. I have checked the functionality of...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.