all b16a2 motors should come with the oil pressure switch....i dont know how yours dont have it....honda screwed you over....are you sure it is a b16a2 head..or is it a conversion swap....
yes you do to make vtec engage properly...i did mine like that without the oil pressure switch in and it ran to 8000 rmp but sounded funny after 6500 .....and it doesnt feel any different, then i connected the oil pressure and it change sound at 4500 for i have a gsr ecu...if you have a...
if you wanna go cheap and you still have the 99-00 si harness , just cut the injectors in the order they are and connect them to your stock harness...they are all color coded.....for the distributor i opened up the si dist. and my stock dist..i looked at where the wires go and i cut the plug...
ah.. this is the same swap im doing right now and i seem to have problems also...only the motor is obd2...first you gotta let me know if you have the small plug that plugs into the ecu.. if you do then i got an obd2 gsr ecu that would fit perfectly .....thats if you have the small plug...i dont...
anyone who has done this swap with an obd2 gsr ecu let me know how you get the wiring hook up...i heard the 96-98 civic ex wire fits all the plugs but i dont know if it will affect the dash compartment....the ex has all three plugs going into the engine and the dx has only two...
if you know...
96 gsr ecu obd2 for sale. also have others for sale.
2000 civic dx axles -make me an offer
2000 civic dx ecu - make me an offer
99 gsr black leather rear seats - 100
92-95 civic rear seats (grey vinyl)-50
2000 civic si gauge-
http://cgi.ebay.com/ebaymotors/ws/eBayISAP...2403888866&rd=1
alpine...
the vtec solenoid should go into pin a4 and the vtec pressure goes into pin d6.. you will need the green plug that goes to the vtec pressure switch....i dont know where you will get it but when you do the blue wire goes to the pin and the black goes to ground.....after that vtec should...
first of all you can use the integra axles or the stock si axle..
your car already has a knock sensor so you dont need to add that wire...next is the vtec solenoid and pressure ....you need different rear bracket and side tranny bracket...from a del sol dohc vtec...oh yeah if you have the stock...
this is an easy guestion cause i did the same thing to my 93 hatch..you need a delsol dohc vtec bracket to make it fit.. the si is too short and the integra doesnt line up ....delsol fits perfect...try it and you'll probably thank me
make sure you have enough coolant and make sure all your hoses to the radiator are clamp on tight...i meant tight..no loose tubings at all..its probably loose so it does have pressure to return the hot coolant ...thats why you dont get hot air..
a h22 into a 94 civic is not just changing the wires and ecu you will need to buy aftermarket mounts and modify your frame a little ...the mounts arent cheap so you better have about 600 bucks before you start your swap..
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.