Search results

  1. E

    I Thought I Had It...

    I have had the swap in for almost a month(B16A1/1990 DX Hatch). Have the S1 tranny, and put in the 1990-1993 axel on the pass side, and the 1987-1989 on the drivers. It all fit perfectly. Now the drivers side is clicking. I don't think it will last long. Should I 1:swap midshafts with a...
  2. E

    Oil Pan Went Crunch

    I just finished the install on my 1990 DX, which still has stock suspension, and tonight I went through a construction zone, and out of nowhere(it was dark) hit the biggest bump of my life. I pulled into a lit parking lot, and saw a nice fat indent on my newly installed oil pan and header. I...
  3. E

    Ok, I Lied....

    I set the TPS to .5 when idle, and the CEL is still on, but by moving the TPS, my car idles normal. But every 5 minutes or so, the CEL goes out, and if I am at idle, the car dies. If I am under throttle, the car lags for a moment, then surges, and the cel comes back on. The 2 codes I am...
  4. E

    Ok Swap Is Up And Running....but...

    When I started doing the wiring, I noticed the TPS sensor had snapped off, so i looked at the harness, and the other end was in it. Apparently, it had snapped during the ship. I bet you all knew that neither Honda nor Acura sell that part, you have to buy the whole throttle body. I went to a...
  5. E

    Help! Ef Swap In Action, Please Read!

    I am swapping a B16A1 with an S1 tranny into a 1990 DX hatch. I went to Autozone and swapped the axels that Hmotors gave me with new ones(rebuilt) with a lifetime warranty(wink,wink). Hmotors told me they were the axels from a 90-93 Teg, and when I swapped them at the auto parts store, they...
  6. Try your Search on Google

Top