Search results

  1. J

    Wheel Shimmy/Shake under Load

    My wheel shimmy's or shake's when I drive normal and it gets ALOT worse under load. I guess thats the best way to describe it. As of now I know that I need an upper pass. control arm bushing, and Motor Mounts, I got my mounts in the mail today and am putting them in later on but I dont know if...
  2. J

    95 GSR Seats in DA

    Will all 4 bolts line-up? Do the backs fit as well? Oh and Pics would be Great...Thanks
  3. J

    JDM DA Gauge Cluster vs. USDM

    I just got my jdm da cluster from ebay and I looked @ the bulbs and they arent amber? Why? Thats the reason I bought it besides it being accurate for my motor rpms. Can someone help me here and pics would be GREAT :mrgreen:
  4. J

    B16 da9 - CEL's 23 & 20

    *UPDATE* I was getting code 23 along with my usual 20 so I traced the problem to 2 things, 1 being the connection where i hardwired in the plug wasnt soldered so I soldered it, and checked it, still got the code. So I checked the other end of the wire @ the ECU only to find it unplugged...
  5. J

    92 Teg w/ JDM B16

    I wanna use a newer oem integra arm on my 92 I am putting the battery in the trunk,anyone know if this will work,please include pics if possible.
  6. J

    CEL's 41 & 2 in 92 b16 teg

    Im getting codes 41 and 2 on my 92 integra w/ a JDM b16a. As of 3 days ago my car would hesitate and have major dead spots and once in a while when i would shut it off and try to immediately start it up again it would just crank and crank and crank then finally start and then stall abruptly...
  7. J

    b16 swap gone bad!

    Okay so i finished the b16 swap in my 92 teg (obd1)and we go to start it but it sounds like its off timing (like skipping, jumping and backfiring)but we tried messin with the dizzy that didnt work and we checked the timing and its DEAD ON!! WHats up here??? I got the motor from...
  8. J

    --92 Teg Mounts for B16 Swap--

    Okay so I am in the middle of my b16a swap in my 92 integra and my timing belt side mount is shot,the rubber insert pulled right out (rotted). And I am tryin to find a quick solution to this problem seeing that I am tying up my friends Garage @ the moment. We came across a mount but its for a...
  9. J

    Killer Cheap Hybrid Garage Sale!!

    I am selling the following parts left over from my Ls/Vtec swap plus more. If you're interested please email me @ JayDeeEmDC4@aol.com -2001 Integra B18b Head COMPLETE w/ Port Matched Intake Manifold by Rogers Automotive Vaccuum & Pressure Tested (MINT!) $450 -1998 D16 SOHC VTEC Head$200...
  10. J

    LsVtec Build Question

    I currently have a stock LsVtec in my DC and I am not 100% satisfied with the amount of power its making so I am buying another LS block and going to build it up and install in a few weeks when TwoPoint2EG gets his freckled behind home!! This way I dont lose time with out a vehicle to drive or...
  11. J

    Built LsVTEC in DC4

    I currently have a Stock LsVtec in my DC and I am not 100% satisfied with the amount of power its making so I am buying another LS block and going to build it up and install in a few weeks, this way I dont lose time with out a vehicle to drive or else I would just yank my motor and build the one...
  12. J

    From LS-to-LS/VTEC

    Okay so here it goes... I just did the LSVTEC the other day (B16 HEAD Stock Internals) and now the car feels slower??? But keep in mind that my CEL is on (Code 21 - VTEC Solenoid) and I have no VTEC @ the moment. Is my car running in limp mode right now? Why does it feel slower or...
  13. J

    Help after LSVTEC Swap - CEL Code 21

    Okay so here it goes... I finished my LSVTEC swap last night around 2am: :sleep - obd2a 99 teggy - obd1 b16a3 head - ECUHACKER.COM LsVtec Chipped ECU w/ conversion harness(2a - 1) I started it up and it ran awesome!! Except when I drove it, NO VTEC!! :( it was overheating and not blowing...
  14. J

    CEL on LS/VTEC???

    Okay during my LSVTEC swap last night we ran into a problem, I had to use the TB off of my LS IM because my B16 one had a Vacuum line on it that my LS didnt have, as well as the IM having another vacuum port that the B16 didnt have. Has anyone ran into this problem doing theyre LSVTEC in the 99...
  15. J

    LSVTEC Dowel Pins

    I am in the MIDDLE of my lsvtec swap and its loks like the dowel pins I bought specifically are suposed to be for lsvtec and they look like theyre not gonna fit, they go from small to big, but which goes where(ls block, or b16 head) are they supposed to be smaller or bigger then the old ones...
  16. J

    LS VTEC Swap 2marrow, Do I have everything I need?

    I am doing my lsvtec tomarrow and was wondering if I have everything I need to be completely done with the swap tomarrow, heres a list: -OBDI Complete B16a3 Head (IM, FR, etc.) (Has been decked/surfaced) -OBDI B16 Shock Tower-to-Engine Wiring Harness -OBDI Alternator -OBDII-OBDI Conversion...
  17. J

    For Sale: JDM Mugen Header

    Moderator edit: This is NOT a real Mugen header. scroll down. I'm not going to close it, as he probably didn't know... just passing the warning off to any potential buyers. orig post below- -pissedoffsol --------------------------------------------------- This Header is mint condition...
  18. J

    LS/VTEC Wiring/ECU Question

    Im in the final stages of my ls vtec swap in my '99 teg' my car is obd2b and i just bought a obd2 - obd1 conversion harness being that im using a usdm b16a3 head and ecu for my swap. Now i was planning on cutting the leg off my stock ls ecu because im broke as shit right now!! But the question...
  19. J

    LS/VTEC Wiring/ECU Question

    Im in the final stages of my ls vtec swap in my '99 teg' my car is obd2b and i just bought a obd2 - obd1 conversion harness being that im using a usdm b16a3 head and ecu for my swap. Now i was planning on cutting the leg off my stock ls ecu because im broke as shit right now!! But the question...
  20. Try your Search on Google

Top