Search results for query: *

got a cat back performance exhaust off a 95 civic coupe will it fit a 96 integra

anyone know much about the celica GT-S i was thinking about buying one :P

would the suspension of a 95 civic coupe fit an integra

like the title reads my engine is up for grabs includes everything you could need. im looking to get £2500 for the lot i think thats a fair price. only thing is im living in the U.K

i had to swap back my engines having sum work done on the ITR motor so put the D15 motor back in. but now when i go to wind the motor over it makes a nasty screeching sound like theres no oil and the start motor sounds like its struggling to turn the motor over. theres oil in it, it ran fine...

when i plugged in my P73 ecu i got no spark, so i jumped the tester plug to see what trouble codes i got. the trouble code light came on it didnt flash it just stayed on.is this the trouble code for the ecu???? also if i plugged in my old P06 ECU and didnt reset that code would that stop my...

on a 99JDM ITR B18C motor where do the o2 sensors go i know one of them goes down to the exhaust near the catalytic converter where does the other one go

on a 95 civic wiring harness does the starter signal wire B9 run from the ecu to the main relay

if i unplugged the engine harness and then tested for trouble codes should the test light still flash codes

if i plugged in my old P06 ecu should it get my 99 b18c motor to spark? also when i test to see if im throwing any codes the light on the dash just stays on does that mean everythings ok?

hey everyone, i know im new round here so thanks to everyone whos helped me out with my swap, the ones who have must of realised by now that im new to all this and kinda unlucky with the swap so far. but how about this for a kick in the teeth. took my car to the local honda dealer this morning...

ok just for peace of mind this project is starting to give me a real headache so ive booked it in at the local honda dealer for them to charge me the earth to probably tell me what i already know.(maybe) this is what ive done start to finish 1.95 civic coupe (OBD1) 2.dropped in 99 b18c out of...

still cant seem to get my car started checked continuity along all the wires from the ecu to the distributor and fuel lines they all seem o.k, cant seem to figure it out anyone have any ideas

ok couple of questions: first even though im using a p73 (obd2) ecu in my swap and my cars obd1 do i still have to swap wire A20 to A17 and if i do wot do i do with the wire that used to be in A17??

i need all the help i can get, i reckon im cursed.... my conversion harness turned up today :thumbsup: plugged it in and tried to start the engine but i dont have a spark :thumbsdown: . anyone got any ideas why. the cars a 95 DX(obd1) with a 99 b18 JDM ITR engine(obd2) running the p73 ecu that...

just need to double check i dont need to add any other wires, the reason i ask is that my 0bd1 chassis to 0bd2 jdm conversion harness should be being delivered this week. so just wanted to know because of the harness im getting, is there any other wires other than the vtec wires that i will need...

i ran the three vtec wires i need from the ecu through to the motor where i just added pins to my plugs on my stock harness for the knock sensor and vtec solenoid but when came to doing the same with the oil pressure sensor there doesnt seem to be a place to put another pin. the engine harness...

I had to add the three vtec wires for my engine swap, ive added the three wires to the plugs on the ecu side and ran them through to the motor, the knock sensor and vtec solenoid were easy as i just had to add the pins to my plugs on the stock harness, my problem is that when i came to do the...

after dropping in the motor i had this plug on the engine harness that didnt seem to have a home so after scratching my head a bit i decided to leave it to be done last thing. so it turns out its the plug for the purge control solonoid. i know the solonoid is on the intake mainfold and ive had a...

where is the vtec oil pressure sensor located on this motor ( 99 b18c ITR JDM) i had to add the vtec wires to my civic DX harness and cant see where to connect the wire to the oil pressure sensor on the engine harness.