Search results for query: *

well after finding out i have a bad z6 head I'm now going to use my spare vtec e z1 head. i was just wondering what my compression ratio will be with this set up? I'm running a bone stock rebuild and a metal oem 3 layer z6 head gasket. I'm assuming my stock p28 ecu will work with this...

I'm getting ready to order my sportmax 002s or the 501's both 16x8 (or 15x8 if easier) for my 93 del sol. now i really want to run the 002's because of the 0 offset look but besides rolling the fenders and having the negative camber will i be able to squeeze these in? the 501's have a +15 offset...

any advise or info on the swap or what i need would be great. thanks

what can you do to these "econo" engines? what mods can be done to help this little guy out?

what kind of psi could i run with a stock d16a1 dohc engine? im looking to boost but know jack about these engines. any help is appriciated

im wanting pics of cars with painted or powder coated blades. i have a white integra now so pics with white cars would be great but im open to other ideas. just want to spice up my blades. anyway thanks in advance

just wondering cause my a1 took a dump on me and i was going to swap my ys1 in my 90 integra. will i run into any problems?

i know this has probly been asked 100 times but what all would it take to get my b18a and ls trans into a 94 civic dx d15 auto? obvously linkage and all for tranny but what else for the engine? thanx

i just bought a 90 integra and i have a fully built b18b out of a 96 integra. now the 90 integra is obd0 and the engine is obd1. i have all the obd1 parts including computer, wiring, ect. what would it take to make my obd0 car a obd1 car? (sorrie if this is confusing)

i have a b18b with the b16 pistons. i was wondering if i got the skunk 2 or blox intake manafold if i would see noticable gains. im running a header, intake, fuel pressure regulator and full exhaust. would upgrading the tb help also?

i know its a honda site but i was wondering if anybody knows if i can put the 4g63 6 bolt motor in my sohc 93? what all will it take to do this? will the tranny bolt up? also are all the eclipse lug patterns the same? i have some 05 wheels and wanted to know if they would bolt up. thanx

i need to know what the rear engine mount bracket looks like out of a 93 integra b18a. its the acual piece that bolts to the block. i need a pic ASAP please

for a b18b. have money in hand

for sell jdm b20b (40xxx miles or less) up for sell is a jdm (under 40xxx mi) b20b engine. i JUST got is shipped to me yesterday from a trusted seller on ebay. it is clean and comes with all the obd2 sensors, power sterring pump, intake and tb. good clean condition. the reason im selling is...

lookin for a 93 integra full body kit or front and rear. preferably the invader, combat, bz, ect but up for anything. i have 300 to spend shipped to springfield, mo 65807. i also have da parts i could trade or what not. thanx.:D

i have $800 and a jdm b20b in my teg with basic bolt ons including, arp headstuds, block guard, 4.2.1 header, 3" exhaust, cold air intake, and a fuel pressure reg. what can i do to help my hp with 800? there way to many options and i dont know which one to take..turbo, vtec head, nirous or build...

so okay. once again i cant make up my mind so i figured id let some honda guro's help me out. which one gives you more bang for your buck? nitrous or turbo? it i did turbo i would run no more then 13 psi max. if i did nitrous i wouldnt go any bigger then a 75 shot. ive got stock internals on my...

okay so the b20b was delivered yesterday. now im puting in the arp headstuds and block guard. what im wanting is pics of boosted da's. i want to run a 12"x 24" intercooler and i cant decide if im going to cut the oem bumper or run a body kit. i want somthing unique yet practical. no flamers...

will b18b arp head bolts fit the b20b? also will a b18b block guard fit in the b20 cylinder walls? thanx:D

up for sell is a nos brand wet nitrous kit. it comes with a 10lb bottle, nitrous and fuel sylinoids, purge, all lines and fittings, and bottle brackets. kit used last year and treated me great. i payed 450 with out the purge im selling for 300. buyer pays shipping. thanx