Search results for query: *

So I haven't been on in a while and life has taken some turns. I was curious what you all thought my car is worth, as I need to sell it or trade it in on something else. I didnt post it in the classifieds yet because I wanted to know what you thought... but if you are interested and want to make...

So Ive got some electrical issues again. This time I was leaving work the other night and as I was pulling out onto the highway to head home the car just kind of sputtered and then died. Will not start at all. I suspected the coil but when I did that simple test to check ohms I got .8 ohms and...

I still have my stock 13" x 4.5" steel rims on my Civic CX but I know someone who has a set of rims he just took off his car that are 16 X 7's. They are a set of aftermarket rims he had on an older 5.0 mustang. Will these work and if so what size of tire am I looking at. My current tires are...

Well I just spent the last hour looking at different posts on this and have confused myself. Ive been wanting to do this conversion and planned to go to the salvage yard next week . From what I gather I am basically looking for a 88-00 civic, or 90-01 integra. to get parts from. I dont think...

So i needed a muffler really bad and decided to have it replaced. I decided I may as well upgrade the rest as well so I had the shop put in 2 1/4 inch pipe all the way up to the downpipe, new muffler and resonator, and removed the cat since it would have been too small anyway. I believe it was...

So my old radiator was trash and I decided to replace it with a used SIR2 one from hmotorsonline. Everything fit fine but then I noticed that the old one has a small black sealed electrical box of some kind that the two wires from the fan run into and then back out of before they plug into the...

I have a huge favor to ask. Can someone take... or does someone have a picture of the front upper control arm bushings and arm from a 92 civic. Basically I need a picture showing what size bushings the stock upper control arms hold. I am going to take a picture of the one I have with a...

Ok I finished installing pretty much all new suspension minus the springs so I figured I would post some pics up and what I did. As soon as I put the pics on the computer i'll try to figure out how to put them on here. So first off... my car had been driving like crap lately...really mushy...

So here in a few weeks im wanting to change all my bushings, tie rod ends, and anything else that looks like it needs to be changed. I saw that the PIC bushings were a little cheaper than the Hardrace ones... I assume they are basically the same. I know one is a little harder than the other...

Here is a very cool paper written on how Honda alternators work using the ELD and ECU. Took me awhile to figure this out. Maybe we can get a sticky on it as I see there are a lot of people online that dont understand how this system works...

So two years ago i replaced the alt. in my car with a carquest one and it was fine until a few weeks ago. I was driving along and the battery light came on.. I took it to knects auto parts and they told me the alt. was bad so i ordered a replacement from autozone as they were the only ones who...

Ok so here is the issue... I need to change my spark plugs and got a new set of ngk g-power (BKR6EGP) plugs from NAPA. These are the same plugs I had before. The problem is I dont know the right gap size for them. the honda book i have says to never re-gap platinum plugs but the only gap size...

Man I always have the strangest problems with my car. Now whenever I go put gas in my car...it doesnt want to start....well i take that back...it starts and runs for about1/2 a second then dies. Then it wont start again for a couple of minutes. I have to sit there trying over and over again...

OK Got a problem here...my celica wont start...it is a 88 toyota celica. Basically what happens is when i try to start it it just sounds like the starter is turning. I can see the flywheel turning while pushing it in gear and it is a brand new starter. Also when i turn the ignition i can see...

Anybody know where I can get the old style upper gasket for the vtec solenoid. Im looking for the one with the metal screen embedded in the o-ring. The one I got from honda is 2 pieces and now i have a small oil leak do to it not sealing correctly. It is in a B16SIR2

OK so my vtec still will not work...(It used to work intermittent when I first did the swap), the solenoid clicks when I connect it to the battery to check it...I did a continuity check between the ecu plugs and where it plugs into the solenoid...everything checks out. My questions are: 1...

Just curious...The wire that goes to the knock sensor looks like it has some kind of shielding on it. I used wire that did not...Will this affect anything? Also what specifically does the knock sensor do...I read it retards the throttle in certain instances.

I was reading my chilton book and owners manual the other day and it says to only use oil that has is "energy conserving II" and with a grade of SG or SL can be used. I have been using Valvoline but it only says I think "SM" on the label. Whats the deal with these letters and what do they...

Ok so I'm looking into buying a new Honda Im torn between puting some money into my EG or......... Buying this......!!!!!!!! AOPA Online -- AOPA Pilot -- HondaJet: Behind the Curtain LOL Sweet hahahaha!!!:D

Only a few more hours till Oregon kicks off. Playing Stanford today. Should be pretty good...I predict a WIN! :thumbsup: ESPN.com - College Football 2006 - Scoreboard