I have a 89 Crx Si with skunk2 full coilovers and a couple cheap upper strutbars.
My chassis still is not as stiff as i would like it to be. what are the most recommended stiffening upgrade to make it perform better. This is my track car fully gutted to 1800 pounds. No Ac No dash No speedo. Not...
hey
i have an 89 crx si with a sohc 1.6 zc motor. i just spooled my tranny last weekend (300k miles and it was gettin ready to go. just rebuit motor has 3k on it and has no problems. I found an import tranny for $279 from a local jap import shop. now on the import zc trannys....... do I have to...
So my auto x car just lost her dash and i need to replace the temp gauge with an after market one but all the ones i found dont have the right adapter to fit into the head. i have found one that fits the replacement one in the block but i need the sender for the fan control to work. the one i...
hey guy my car has been acting up lately and not starting
it cranks but wont fire up. then you let it sit for 10 min it will fire right up
only happens when the motor it warm and you shut it off then try to start it again.
When it wont start it spits the code 16 at me (fuel injector) and in the...
last year was my first year doing auto x and i have looked at the scca regs for a long time now and cant find anything on dash removal if anyone has any idea what they are
i would appreciate it .. oh yeah for reference i'm running my rex in E prepared...
hey i have been looking around for instructions on how to install oil lines on a turbo and haven't found anything. is there two lines or just one, i figure there would be two one in and one out but i don't know because every kit i have seen there is only one? any helps would be great thanks
k i have a si tranny in my rex and it is on its last leg.
i cant find a si tranny for a replacement.
there is a used 1.5 tranny that the guys at jmd imports have but i was wondering
what that will do for power. this is my autox car and my second gear redlines at about 30mph what does a dx second...
ok so my 89 rex has a sohc zc {d16a6} and i recently did a full rebuild on it.
new pistons, rings , bored to 76mm head and block surfaced bearings the works
now when i go to put the timing belt on it doesn't line up so i bought a adjustable cam gear and made it work but how much would the...
ok so my 89 rex has a sohc zc {d16a6} and i recently did a full rebuild on it.
new pistons, rings , bored to 76mm head and block surfaced bearings the works
now when i go to put the timing belt on it doesn't line up so i bought a adjustable cam gear and made it work but how much would the...
ok well this is a noob question but i just bought courbeau 3" camlock harnesses and i cant figure out the where i'm sposed to to mount them on the frame. cant seem to find any pics or posts or anything on the subject anything would be helpful thanks.......
k so i have a 89 CRX Si with a sohc zc which i just got done doing a full rebuild on.
My only problem is that before i rebuilt it my tranny mount broke and slammed my TPS sensor against my firewall snapping it in half so i went to the salvage yard and got the throttle body and a tps plug for a...
ok well i have a sohc zc that i want to turbo. this motor is burning oil pretty bad so i figure if i get new valve guides and piston rings that would solve that problem but my step father mentioned that the cylinder walls may be to warn to just put stock pistons in so i might have to bore it.I...
ok well i have a sohc zc that i want to turbo. this motor is burning oil pretty bad so i figure if i get new valve guides and piston rings that would solve that problem but my step father mentioned that the cylinder walls may be to warn to just put stock pistons in so i might have to bore...
well my crx came with a sohc zc in it and i was wondering if i could put a dohc zc head on the or a d16a1 head on the sohc block or if there is even a difference in the zc sohc/dohc blocks?
This might be a dumb question but i think its worth asking.OK i have two crxs and they both came with sohc zc motors in them and my local auto salvage yard has a d16a1 dohc head and i was wondering if i could pull the sohc off of one of my motors and put that head on it with the longer timing belt?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.