I have a 98 hatch with an auto trans. I am thinking of converting to manual. How hard is it and what all do i need? Im an EF guy who just got an EK. And ive been out of the Honda scene for alittle bit now so ive forgotten quite a bit. And information would be great.
-Carl-
So i have a 91 honda civic 4dr with a ls swap and many mods. Have had the car for 3 yrs and bought it with the stock dual point d15. However, the car has sat outside for almost 6 months now untouched and undriven. I have a nice big garage and plent of free space inside, never once put it away...
I seem to be loosing all my break fluid at a steady rate. There is barely any pressure when i push the break pedal. When i do push the break, it pulls to the right side and often starts to shake the car. When the car is off and i push the pedal pressure will build but not last. I have checked...
I seem to be loosing all my break fluid at a steady rate. There is barely any pressure when i push the break pedal. When i do push the break, it pulls to the right side and often starts to shake the car. When the car is off and i push the pedal pressure will build but not last. I have checked...
So i have a 4dr and im trying to decide on what color to paint it. I just repaird the rear qtr panals so it needs paint soon. Shes just chillin in primer. I thought about a flat black with a clear coat. But also type R yellow is very sexxy on an EF. Just give me some ideas plese. Or inpute...
Here are a few things im looking for. Thought i would look for used before i resort to new.
1: front camber kit for 91 civic 4dr
2: some set of wheels for cheap that will fit on my honda (4x100)
3: b series turbo mani
4: bov
5: strust bars front and rear
6: rear lower control arms
Just...
I have a b18a1 in my 91 4dr. Its throwing code for injectors (16). Before it was for fuel system supply (43). When you turn the car on it sounds like a Subaru and it revs out at 3000rpm. When you give it gas it just BLOWS white smoke and sprays gas. Its like the gas is just straight blow by...
Im having a few issues here. I swapped a b18a1 into my 91 civic sedan lx and now Its throwing codes 1 4 and 6.... 1 is 02 sensor, 4 is crank shaft position and 6 is temp sensor. But the big problem is how its running. It running dangerously lean. The wiring is wired for the b series and for...
Anyone done this befor? My friend and i came across an AWD wagovan for $100 with good drive train and motor. So we decided to take our Honda brilliance and try to convert a FWD Hatch into a AWD hatch with the drivetrain we got. Its going to need a few mods but we are getting there. Ill post a...
I have a virgin p28 ECU that i had bought here on HS but never ended up using it. Ill let it go for $110 shipped. I also have a set of Euro Tailights off of a 92-95 Civic Coupe, ill let them go for $45 shipped. One has a crack in it so it tends to get water in it after ALOT of rain. I can have...
So me being the dumb ass that i aim decided to take on the task of rewiring a car. I know exactly where the problem is i believe. On the passanger side and the driver side there is a little whiteish colored box that you pin all the ground wires to and that bolts to the bay causding your ground...
I need a running d15b7 in decent running condition. As in it doesnt burn oil, and doesnt make noise. Im located in cedar rapids, iowa local would be nice. Help me out, thanks...
-carl-
Is no power stering a big differance? I havnt drove a car without it so i dont know. But im thinking about removing mine before i finish my swap. So any ideas or input would be great. thanks
-Carl-
Ive looked at all the for sale posts and some people DO have a p28 up for sale. Ive pm'ed them and left replys. But im getting nothing back and I need this to finish my swap. I need a p28 obd1 manual vtec. Chipped or virgin it doesnt matter. If you happen to have one and you want to get rid of...
Im doing a z6 on a d15 block. I need to know which timing belt to buy. one is 106 teeth and the other is 107. Im pretty sure i need the 107 but im making sure before i spend the money. thanks
-Carl-
I need to finish my project and i have a few big things i need.......
p28 ECU
VTEC harness from a 4th gen
ECU jumper for OBD0-OBD1
I have a set of 92-95 euro taillights and a bomz racing 2 tier wing if anyone is interested.
thanks, help me out.
-Carl-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.