Search results for query: *

Hey guys I got a 95 Teg GSR Stock, I just got a T3/T4 Hybrid Turbo specs are .48AR Intake and .63AR Exhaust and .57 Trim. I am using a FMIC 18X9X3 also going to order a hondata s200, was thinking of V-AFC hack but decided to do it right. So I got some RC injectors for 550cc for cheap new for...

T25/t28 turbo for $295.00 Is this a good turbo , price sure does look good, and where in the hell would I get a downpipe for this unit???

PLZ Help Hey guys I need a new ecu and I was wondering does a chipped p28 with say a mugen or skunk program, run ok for the gsr. Also will it throw any codes because it is a different ecu, I am starting to get really pissed here, because I am getting a code 3 and code 22 (map sensor defective...

I need a map sensor, I get a code 3 on my GSR 95 Teg and I have priced them and the cheapest I have found is $175.00, any suggestions. Or does anyone have one??? And is there anywhere I can get one cheaper, also will a integra ls say 95 map sensor work, or since I am going to run boost like I...

Anyone have a p72 ecu obd 1 for sale please let me know ASAP thanks

I am ordering a Hondata S200 system this week, I am going to definetly get the 3 step rev limit option, but I already have a FMU and Missing Link can I still run the Hondata system, and not using the boost option for my turbo setup and just use the FMU and missing link that I already have...

Quick ?? What is a good amount to boost a stock h22 with a t3/t4 turbo, the engine is completely stock and will either run the v-afc hack or maybe a hondata s200, I would appreciate any opnions and recommendations thanks

Except Hondata is there any other program or ecu reprogramer that is just as good and can offer full throttle launch and full throttle shift. Hondata is pretty high I think, but I understand the worth of it. I like the boost, vtec control and most importantly both of the full throttle capabilities.

ok here is the deal, I have finally decided to go ahead and build my b18c bottom and top, top will be, port and polish, new stainless valves, dual springs and titanium retainers, and stock cams. Bottom end I will get Eagle H Beam Rods and Type R Pistons ,and crank polished, balanced and knife...

Hey guys I got a 95 Teg GSR, stock bottom and stock head. I have a NX Express Kit and it is a Dry Nozzle, what would be safe for me to run 55hp or 75 hp , I want as much as I can get , oh yeah the rings have been replaced not to long ago, so I guess I really do have to be worried to much about...

WTB: I Need a P72 OBD1 GSR ECU I need one of these ECU's at a reasonable price if anyone has one please let me know , thanks jdmperformance03@hotmail.com

Ok here is the deal I was thinking , I want to get my GSR B18C1 block, decked out before I put the turbo on it, the hell with it, if I am going to do it I wanna do it right , I need a ton of input on this , where are some shops that you guys recommend to Assemble a B18C1 block , as well sleeved...

Check this 99si whoop this Trans Am ass!!! I love it !!! 99 si whooping up on a Trans Am

anyone want to trade a V-AFC for a S-AFC, if so email me back at jdmperformance03@hotmail.com , also I am willing to sell for $150.00 thanks Oh yeah works fine currently installed on my 95 teg GSR thanks

I AM LOOKING FOR A 96-98 EK CIVIC OR NEWER WITH NO MOTOR OR TRANNY OR ECU. JUST BASICALLY A BODY, BUT WITH INTERIOR AND INTACT. IF YOU GOT ONE THAT IS IN GOOD CONDITION AND NEVER BEEN WRECKED LET ME KNOW. THANKS

I have a 95 TEG GSR, and I am putting together my turbo stuff, and I am thinking of using DSM Injectors and was wondering which ones I can use 1G or 2G and which ones will go right in without having to change injector plugs thanks

Got a ?? I have seen some turbo setups when you are just idling that you can rev the engine and it will engage the BOV, is that the turbo or is that the BOV that allows you to do that , at just idling, cause my friend has a Turbo XS Blow Off Valve and a external wastegate and his wont due that...

Just get a new one about $60 dollars,

Stock GSR Motors are 10:1 Compressions as far as I know , and how and where can I take it to be compression tested,so I can make sure the pistons and rings are still working good. I heard there is a tool I can use to see , and it measures it in PSI, if so what is a stock GSR Motor from a 95 teg...

Hey guys here is my deal, I have a 95 Integra GSR, that has check this out 424,000 miles on it, BUT take this in to acct, the car still runs super strong and does not smoke nor leak, the owner that had it before me said within 1 year ago he replaced the head with a new one, and when he did that...