Search results for query: *

Ok, I have a bit of a problem. I had a d16y7 that blew up. So i bought a motor. I found out later the d16y7 i bought was an automatic. That was okay because i could just bolt on my manual transmission and be fine i think. Well my problem is this... I get codes 1 & 14 mil 1 = I looked up by...

I need a iacv that bolts to the throttle body. i need it for a 5 speed d16y7 i need one soon

hi i need a d16y8 vtec head with no problems. ive been screwed with one that had bent valves on the #2 cylinder. so ill be getting it looked @ and tested before it goes on. so please, can someone sell me a good one?

ok so my.. cyl1 - 130 cyl2 - 0 cyl 3 - 180 cyl 4 - 180 so after seeing that i took a cap of oil and poured it down the spark plug tube [aka wet test] and it still was at 0 compression. so does that mean its the headgasket or cylinder head? idk what to do from here :(

ok here are my problems. right now my fuel pump isnt priming and i only hear a click when i turn my key to start. this didnt start until just now and it was random.... but before that.... i had a high idle problem 1450rpms and my CEL kept flashing while the car was running, it was a...

okay so what i did was swap a different y7 head on my y7 block because the other one had a bad lifter. well i try to start the car and it idles at like 100 and when you floor it, after 10 sec or so it revs up but i noticed alot of smoke comes out if above like 3000[grey colored] maybe because...

so i swapped a y8 into my dx and everything is all good.. except code 23/well i got the 2 wire circular plug, and plugged it in, and grounded the other wire. code 23... so i swapped the wires... code 23... yes i reset the ecu, anytime i go over 4000 the light comes on. seems a lil...

ok so i swapped everything in. i had a d16y7 in my 97 hatch. i swapped to an 2000 d16y8. well in doing so i had problems with it starting. so i noticed the thermostat housing ground wasnt attached. so i did that and the car starts. well the problem now is that the car idles high and the...

ok so i got a d16y8 swapped into my 97 hatch. the motor is a 00 y8. i did the 2 wire iacv fix. i didnt wire up vtec yet. well the mechanic said there is no spark, there is no fuel. also when you turn the key you dont hear the fuel pump. could it be ecu related? could i have gotten a bunk...

hi, on the vtec solenoid, there is the 1 pin grey connector at the top... then the 2 wire connector at the bottom of it. how do i wire this up. i believe the 2 wire..one is just grounded out and the other to the ecu but what is the 1 pin connector called

i have a 96 dx that im swapping a 2000 d16y8 obd2b into my car. after doing all the iacv 2 wire fix and wiring up vtec and knock and hooking up the p2p ive come to one problem... ok so i have a 2 wire from a vtec solenoid. then i had a "iacv 2 wire plug" sent to me. well they look exactly...

i have an vafc1 and also a apexi neo. i have a d16y8 stage 1 gude cam aem adj cam gear header 2.5 exhaust no cat i was wondering what one is better. and does one have a race mode then a daily drive mode? im going to get it professionally tuned with dyno

hi i have a 00 ex y8 and i need the iacv 2 wire connector. call me 8152097905 i have cash in hand and need asap

will the distributor from my 97 dx y7 work on the 00 ex motor im putting in?

ok ive got ... 96-00 civic ex p2p ecu for a 5 spd -make offer 96-00 civic dx ecu -make offer y8 vtec solenoid with sensors - make offer 99-00 civic headlights PERFECT condition no hazing at all i was wearing a red shirt so thats what the red is from...and they come with brand new...

hey ive got for sale a 96-00 5 spd manual p2p ecu 96-00 d16y7 ecu and a "spool valve assembly" aka vtec solenoid with sensors everything is make an offer let me kno pics in a sec

if i drop a 00 d16y8 block and trans with air injection intake mani into my 97 dx hatch will i block the air injection ports? or leave em be? ill be running the 96p2p ecu so im confused to keep em or plug em:cool:

I have a first gen VAFC controller that is better than the VAFC2 because of more tuning points! bet you didnt know that did you? no scratches or scuffs anywhere. everything included. except manual sorry. but you can get it off the apexi website for free. i lost it. its the blue/grey...

hi im doing a motor swap into my 97 hatch dx. I was planning on reusing the 97 motor harness but i heard i need the motor harness for the vtec motor the motor is out of a 2000 so idk if i should buy a 96 ex harness and use a 96 ecu or get a 2000 harness and use the obd2b ecu

hey im getting a 2000 civic ex motor [d16y8] . im putting it into my 97 hatch dx. i have a few questions. if im using the harness from the y7 onto the y8 and hooking everything up..is there anything else i need to do? Im going to use the 96 ex ECU P2p on the 00 motor. what is air injection...